Upload hybridizedwtla_195.py

hybridizedwtla_195.py

@@ -0,0 +1,72 @@
+# -*- coding: utf-8 -*-
+"""hybridizedWtla.195
+
+Automatically generated by Colab.
+
+Original file is located at
+    https://colab.research.google.com/drive/1lOpPihOMUo0SqAGMae7YfxZamFwDQDZM
+"""
+
+import RPi.GPIO as GPIO
+import ADC0834
+import LCD1602
+import dht11
+import time
+GPIO.setmode(GPIO.BCM)
+
+buzzPin=22
+tempPin=26
+buttonPin=24
+
+myDHT=dht11.DHT11(pin=tempPin)
+GPIO.setup(buzzPin,GPIO.OUT)
+GPIO.output(buzzPin,GPIO.HIGH)
+ADV0834.setup()
+LCD1602.init(0x27,1)
+
+GPIO.setup(buttonPin,GPIO.IN.pull_up_down=GPIO.PUD_UP)
+buttonState=1
+buttonStateOld=1
+setMode=True
+buzzVal=85
+
+try:
+  while True:
+    buttonState=GPIO.input(buttonPin)
+    if buttonState==1 and buttonState
+      setMode = not setMode
+    print(buttonState)
+    buttonStateOld=buttonState
+    time.sleep(.2)
+    if setMode==True:
+      analogVal=ADC0834.getResult()
+      buzzVal=int(analogVal(100/255))
+      LCD.write(0,0, 'Set Trip Temp:')
+      LCD.write(0,1,str(buzzVal)
+      time.sleep(.25)
+      LCD.clear()
+      GPIO.output(buzzPin,GPIO.HIGH)
+    if setMode==False:
+      result=myDHT.getResult(0)
+      if result.is_valid():
+        tempC=result.temperature
+        tempF=tempC*1.8+32
+        tempF=round(tempF,1)
+        print(buzzVal)
+        if tempF<buzzVal:
+          GPIO.output(buzzPin,GPIO.HIGH)
+          LCD1602.write(0,0, 'Temp: ')
+          LCD1602.write(6,0,str(tempF))
+          LCD1602.write(0,1,'Humidity: ')
+          LCD1602.write(10,1,str(hum))
+          LCD1602.write(14,1,'\')
+        if tempF>=buzzVal:
+          GPIO.output(buzzPin,GPIO.LOW)
+          LCD1602.write(0,0,'Temp: ')
+          LCD1602.write(6,0,str(tempF))
+          LCD1602.write(11,0,' F')
+          LCD1602.write(0,1,'ALERT: Temp Reaching High Temp')
+      time.sleep(.1)
+except KeyboardInterrupt:
+  time.sleep(.2)
+  GPIO.clenup()