# -*- coding: utf-8 -*-
"""hybridizedWtla.195

Automatically generated by Colab.

Original file is located at
    https://colab.research.google.com/drive/1lOpPihOMUo0SqAGMae7YfxZamFwDQDZM
"""

import RPi.GPIO as GPIO
import ADC0834
import LCD1602
import dht11
import time
GPIO.setmode(GPIO.BCM)

buzzPin=22
tempPin=26
buttonPin=24

myDHT=dht11.DHT11(pin=tempPin)
GPIO.setup(buzzPin,GPIO.OUT)
GPIO.output(buzzPin,GPIO.HIGH)
ADV0834.setup()
LCD1602.init(0x27,1)

GPIO.setup(buttonPin,GPIO.IN.pull_up_down=GPIO.PUD_UP)
buttonState=1
buttonStateOld=1
setMode=True
buzzVal=85

try:
  while True:
    buttonState=GPIO.input(buttonPin)
    if buttonState==1 and buttonState
      setMode = not setMode
    print(buttonState)
    buttonStateOld=buttonState
    time.sleep(.2)
    if setMode==True:
      analogVal=ADC0834.getResult()
      buzzVal=int(analogVal(100/255))
      LCD.write(0,0, 'Set Trip Temp:')
      LCD.write(0,1,str(buzzVal)
      time.sleep(.25)
      LCD.clear()
      GPIO.output(buzzPin,GPIO.HIGH)
    if setMode==False:
      result=myDHT.getResult(0)
      if result.is_valid():
        tempC=result.temperature
        tempF=tempC*1.8+32
        tempF=round(tempF,1)
        print(buzzVal)
        if tempF<buzzVal:
          GPIO.output(buzzPin,GPIO.HIGH)
          LCD1602.write(0,0, 'Temp: ')
          LCD1602.write(6,0,str(tempF))
          LCD1602.write(0,1,'Humidity: ')
          LCD1602.write(10,1,str(hum))
          LCD1602.write(14,1,'\')
        if tempF>=buzzVal:
          GPIO.output(buzzPin,GPIO.LOW)
          LCD1602.write(0,0,'Temp: ')
          LCD1602.write(6,0,str(tempF))
          LCD1602.write(11,0,' F')
          LCD1602.write(0,1,'ALERT: Temp Reaching High Temp')
      time.sleep(.1)
except KeyboardInterrupt:
  time.sleep(.2)
  GPIO.clenup()