question
stringlengths 8
144
| positive_context
stringlengths 38
1.17k
| negative_context_0
stringlengths 50
1.06k
| negative_context_1
stringlengths 19
1.03k
| negative_context_2
stringlengths 41
1.11k
| negative_context_3
stringlengths 22
1.09k
|
|---|---|---|---|---|---|
where is the pyramids of giza
|
The Great Pyramid of Giza (also known as the Pyramid of Khufu or the Pyramid of Cheops) is the oldest and largest of the three pyramids in the Giza Necropolis bordering what is now El Giza, Egypt. It is the oldest of the Seven Wonders of the Ancient World, and the only one to remain largely intact. The Great Pyramid is surrounded by a complex of several buildings including small pyramids. The Pyramid Temple, which stood on the east side of the pyramid and measured 52.2 metres (171 ft) north to south and 40 metres (130 ft) east to west, has almost entirely disappeared apart from the black basalt paving.
|
The united passageway then leads to the burial chamber. The Pyramid of Menkaure: Khafre's son, Menkaure, built the smallest of the 3 main Pyramids on the Giza Plateau. This one was only a mere 65.5m (215ft) tall, nowadays 62m (203ft), with sides of only 105m (344ft) and an angle of 51.3 degrees.
|
Khufu, son of Snefru and second ruler of the 4th dynasty (time line) moved the royal necropolis to Giza, north of modern-day Cairo. According to ancient Greek historian Herodotus, Khufu (aka Cheops) enslaved his people to build his pyramid. On the Giza Plateau, Khufu's builders oriented his pyramid almost perfectly north. The largest pyramid ever built, it incorporates about 2.3 million stone blocks, weighing an average of 2.5 to 15 tons each. It is estimated that the workers would have had to set a block every two and a half minutes.
|
Back to Site List. Giza is located west and south of modern Cairo, in the vast desert imagined by the ancient Egyptians to be the land of the dead. Guarded by the Great Sphinx, the plateau is dominated by the massive pyramids of Khufu (Gr. Cheops), Khafre (Gr. Chephren), and Menkaure (Gr. Mycerinus), all of whom ruled Egypt during the 4th Dynasty (c. 2500 BC).
|
The Great Pyramid of Giza stands on the northern edge of the Giza Plateau, located about 10 miles west of Cairo. It is composed of over 2 ½ million blocks of limestone, which weigh from 2 to 70 tons each.
|
how far in advance do you sign up for social security
|
A. You can. Social Security will accept your application for early benefits when you're 61 years 9 months. Regardless of how old you are, the agency generally recommends that you apply three months before you would like the first payment to arrive. See also: How to apply for Social Security benefits online. But I'm afraid that even if you apply in advance with all your paperwork in order, you can't expect to get a check right after your birthday. Community: Share your fears about Social Security.
|
If you do not live in the U.S. or one of its territories you can also-Contact the nearest U.S. Social Security office, U.S. Embassy or consulate. Reminders: 1 You must be at least 61 years and 9 months old to apply for retirement benefits. 2 If you are already age 62, you may be able to start your benefits in the month you apply. 3 You should apply for benefits no more than four months before the date you want your benefits to start. 1 If you are not getting Social Security and you are not ready to retire, you should still use our online retirement benefit application to sign up for just Medicare three months before your 65th birthday.
|
If you are already receiving Social Security benefits, you will be automatically enrolled in Medicare. After you receive your Medicare card, you can choose your path (Original Medicare or Medicare Advantage), find the right plan(s), and sign up for coverage.
|
Be aware that Social Security pays a month behind — if you're entitled to a benefit for the month of March, it's paid to you in April. And if you want to start retirement benefits at the earliest possible age, 62, the first payment will arrive two months after the month of your birthday. For example, if your birthday is Feb. 15, your first month of entitlement for benefits will be March, and your first payment will arrive in April. December 27, 2013. En espanol | Español apply three months before you want to start. Collecting be aware That Social security pays a month — behind if'you re entitled to a benefit for the month Of, march'it s paid to you In. april
|
In the year you reach your full retirement age, you can earn up to $37,680 between January and your birthday without penalty. Above that amount, your Social Security check will be reduced by about 33 cents for every dollar earned. About 54 percent of current 61-year-olds didn't know that you need to apply 3 months in advance of receiving your first payment, Fidelity found, and 7 percent erroneously believed that the Social Security Administration would contact them to set up payments.
|
non deductible ira contribution converted to roth
|
Instructions. Request a conversion from your traditional IRA containing non-deductible contributions to your Roth IRA by completing the Roth IRA conversion form available from your financial institution. Once you have submitted the form, the financial institution will automatically transfer the money.
|
Reminder: IRS Form 8606 must be filed for any tax years that you distribute assets from your Traditional IRA if any of your Traditional IRA balances include non-deductible contributions. IRS Form 8606 is used to help you determine the taxable portion of your distribution or conversion. When your Traditional IRA balance consists of deductible and non-deductible contributions, any amount distributed or converted from the Traditional IRA is pro-rated to include a taxable and non-taxable portion of the assets. You may figure the taxable amount by using the following formula: (Total Deductible Contribution/Total IRA Balance) x Distribution/Conversion Amount = Non-Taxable Amount. Let's say you have non-deductible contributions of $8,000 in a Traditional IRA that have grown to $100,000. The taxable amount would be:
|
If you decide to convert all $30,000 of your IRA money, then $15,000 (the amount you contributed to the non-deductible IRA on an after-tax basis) would not be taxable since you’ve already paid the tax on that money.
|
For example, if 5% of your non-Roth IRA are non-deductible contributions, then 5% of the conversion amount must be non-deductible contributions, and the rest must come from the deductible contributions, including earnings and rollover contributions. When you make non-deductible contributions to a traditional IRA, you'll have the basis, the amount of non-deductible contributions, reported on Form 8606. When you convert a part or all of your traditional IRA to a Roth IRA, the conversion amount must contain the non-deductible portion proportionally.
|
The IRA consists of $90,000 in non-deductible contributions and $10,000 in earnings. If she decides to convert the entire IRA to Roth, she would only have to pay tax on the earnings portion ($10,000). At a 30% tax rate, she would owe $3,000 in tax to convert the entire $100,000 to Roth. If Smith had no earnings in this IRA, the entire $100,000 (all non-deductible contributions) could be converted with no tax liability.
|
what are tocopherols in food
|
Tocopherol is a naturally occurring chemical element found in a variety of foods. It is commonly called vitamin E in a generic sense, as vitamin E substances are made up of tocopherol and similar elements. The most common form of this element is called alpha-tocopherol. Tocopherol in the form of vitamin E is a regular part of the average diet, with specific recommended dosages available to the public from U.S. science institutions in the form of recommended daily allowance or RDA. Foods that include vitamin E will usually have the RDA printed on the nutritional label.
|
Vitamin E is widely used as an inexpensive antioxidant in cosmetics and foods. Vitamin E containing products are commonly used in the belief that vitamin E is good for the skin; many cosmetics include it, often labeled as tocopherol acetate, tocopheryl linoleate or tocopheryl nicotinate. Alpha-tocopherol is the form of vitamin E that is preferentially absorbed and accumulated in humans. The measurement of vitamin E activity in international units (IU) was based on fertility enhancement by the prevention of miscarriages in pregnant rats relative to alpha-tocopherol.
|
Other nuts, including hazelnuts, pine nuts, peanuts, Brazil nuts and pistachios are also good sources, with between 0.5 and 2 milligrams in a 1-ounce serving. Sunflower seeds are high in alpha-tocopherol as well, providing over 8 milligrams in 1/4 cup. Sprouted seeds provide small amounts of the vitamin, too. Alpha-tocopherol is an alternative name for vitamin E, which has many important functions in your body. A potent antioxidant, alpha-tocopherol protects you from potentially damaging free radicals, while also boosting your immune system to help you fight off viruses and pathogenic bacteria.
|
Flint River Ranch uses tocopherols, a natural antioxidant and Vitamin E source, and human-quality ingredients to slow the oxidation process of fats and oils to ensure its premium pet food products remain fresh as in their initial state. Vitamin E is an antioxidant that retards the oxidation of other vitamins.
|
An assessment of the safety of tocopherols as food additives. Tomassi G, Silano V. This paper is a critical review of data relevant to the safety of tocopherols as food additives. Tocopherols are considered from the standpoint of their chemical-physical properties, occurrence in nature and use in commercial products.
|
richmond virginia hill names
|
Libby Hill Park. Last Updated: 2009-12-06. 2801 E. Franklin Street, Richmond, VADogwood Dell Event Line: (804) 646-DELL. Located at 28th and E. Franklin Streets, Libby Hill Park is one of the three original parks in Richmond's park system. It was originally called Marshall Square, and the view from Libby Hill Park is said to so closely resemble the view of Richmond on the Thames in England that it gave the city its name.
|
Church Hill, also known as the St. John's Church Historic District, is an Old and Historic District in Richmond, Virginia. This district encompasses the original land plat of the city of Richmond. Church Hill is the eastern terminus of Broad Street, a major east-west thoroughfare in the Richmond Metropolitan Area]].
|
Church Hill, due east of downtown, above Shockoe Valley, where Patrick Henry gave his famous speech at St. John’s Church, which is apparently the highest spot in the city. Union Hill, just north of Church Hill on that same knobby ridgeline, is an old residential neighborhood.
|
Church Hill is known as the site of Virginia's second revolutionary convention, where Patrick Henry gave his Give me liberty or give me death speech in St. John's Episcopal Church, Richmond, Virginia. It is also known for Chimborazo Park, where the largest American Civil War Hospital was located.
|
Church Hill, due east of downtown, above Shockoe Valley, where Patrick Henry gave his famous speech at St. John’s Church, which is apparently the highest spot in the city. Union Hill, just north of Church Hill on that same knobby ridgeline, is an old residential neighborhood.
|
richmond virginia hill names
|
History [edit]. Church Hill is known as the site of Virginia's second revolutionary convention, where Patrick Henry gave his Give me liberty or give me death speech in St. John's Episcopal Church, Richmond, Virginia. It is also known for Chimborazo Park, where the largest American Civil War Hospital was located.
|
Church Hill, due east of downtown, above Shockoe Valley, where Patrick Henry gave his famous speech at St. John’s Church, which is apparently the highest spot in the city. Union Hill, just north of Church Hill on that same knobby ridgeline, is an old residential neighborhood.
|
Church Hill, due east of downtown, above Shockoe Valley, where Patrick Henry gave his famous speech at St. John’s Church, which is apparently the highest spot in the city. Union Hill, just north of Church Hill on that same knobby ridgeline, is an old residential neighborhood.
|
Church Hill, also known as the St. John's Church Historic District, is an Old and Historic District in Richmond, Virginia. This district encompasses the original land plat of the city of Richmond. Church Hill is the eastern terminus of Broad Street, a major east-west thoroughfare in the Richmond Metropolitan Area]].
|
Church Hill is known as the site of Virginia's second revolutionary convention, where Patrick Henry gave his Give me liberty or give me death speech in St. John's Episcopal Church, Richmond, Virginia. It is also known for Chimborazo Park, where the largest American Civil War Hospital was located.
|
cost of web development
|
From our research here is what OTHER COMPANIES CHARGE f or website development: Master level Web Development costs from $75-120/hr. Custom Graphics costs $65-$75/hr. On-Site Digital Photography costs $80+/hr. Maintenance Contracts are negotiated for around $55-$75/hr. Hourly rate for website development costs: $65/hour (USD) Basically, we charge for our time. We have the proper tools and experience to get your job done quickly and professionally. We are a home-based business with low overheads.
|
But you should assume that you’re going to pay at least an additional $100 more than if you were redesigning an existing website. For your budget, you should start with at least $500 as a base cost for building a site from scratch, and $250 if you’re looking at a redesign. Multimedia like Flash and video can be difficult to integrate with a website. And if you’re having the design firm create the multimedia devices the you should be prepared to pay more. You should budget $750 to get some basic Flash or video on the site and another $750 or more to create the multimedia.
|
Determining how much a web site should cost is one of the most frequently asked but rarely answered questions in the web design world. Even now, with millions of websites online, there exists no magic formula for calculating either the cost of a new web site or the cost of a redesign. A website's value is drastically different in 2015 than it was even a couple of years ago. The above chart provides a timeline of historical dates compared to web site cost, including the vareage cost to build a website.
|
While price varies depending on your needs, we can estimate a general range of costs based on our experience. The days of the $10,000 website are long gone for most businesses. The most costly portions of your website development are usually custom programming and the design layout itself.
|
By Scott Clark. Tweet. In our last article we showed you some free online web development tools as well as a free open source shopping cart CMS. In this article we will look at some economical web development tools that, while not free, are well worth the cost to the developer on a tight budget. Every web developer needs some basic software in order to develop and design a website. With the current economy, many developers are in the position where they need to minimize the cost of development tools. To begin with, we will look at some basic software, including an:
|
cost of web development
|
From our research here is what OTHER COMPANIES CHARGE for website development: Master level Web Development costs from $75-120/hr. Custom Graphics costs $65-$75/hr. On-Site Digital Photography costs $80+/hr. Maintenance Contracts are negotiated for around $55-$75/hr. Hourly rate for website development costs: $65/hour (USD) Basically, we charge for our time. We have the proper tools and experience to get your job done quickly and professionally. We are a home-based business with low overheads.
|
Determining how much a web site should cost is one of the most frequently asked but rarely answered questions in the web design world. Even now, with millions of websites online, there exists no magic formula for calculating either the cost of a new web site or the cost of a redesign. A website's value is drastically different in 2015 than it was even a couple of years ago. The above chart provides a timeline of historical dates compared to web site cost, including the vareage cost to build a website.
|
But you should assume that you’re going to pay at least an additional $100 more than if you were redesigning an existing website. For your budget, you should start with at least $500 as a base cost for building a site from scratch, and $250 if you’re looking at a redesign. Multimedia like Flash and video can be difficult to integrate with a website. And if you’re having the design firm create the multimedia devices the you should be prepared to pay more. You should budget $750 to get some basic Flash or video on the site and another $750 or more to create the multimedia.
|
While price varies depending on your needs, we can estimate a general range of costs based on our experience. The days of the $10,000 website are long gone for most businesses. The most costly portions of your website development are usually custom programming and the design layout itself.
|
Their average web application development cost is around $500K and their staff or contractors' salary is in the six figure plus range. Their proposals are usually based on a lot of fluff with the development rate ranging from $400 - $800 per hour. These types of companies focus on custom development.
|
what is plc
|
A programmable logic controller, PLC, or programmable controller is a digital computer used for automation of typically industrial electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many machines, in many industries. PLCs are designed for multiple arrangements of digital and analog inputs and outputs, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. More recently, PLCs are programmed using application software on personal computers, which now represent the logic in graphic form instead of character symbols. The computer is connected to the PLC through Ethernet, RS-232, RS-485, or RS-422 cabling.
|
Programmable Logic Controller (PLC) is a digital computer used for the automation of various electro-mechanical processes in industries. These controllers are specially designed to survive in harsh situations and shielded from heat, cold, dust, and moisture etc. PLC consists of a microprocessor which is programmed using the computer language. The program is written on a computer and is downloaded to the PLC via cable. These loaded programs are stored in non – volatile memory of the PLC. During the transition of relay control panels to PLC, the hard wired relay logic was exchanged for the program fed by the user
|
BREAKING DOWN 'Public Limited Company-PLC'. A limited company grants limited liability to its owners and management. Being a public company allows a firm to sell shares to investors this is benificial in raising capital. Only Public Limited Companies may be listed on the London Stock Exchange and will have the suffix PLC on their ticker symbol. A Public Limited Company's stock can be acquired by anyone and holders are only limited to potentially lose the amount paid for the shares. It is a legal form more commonly used in the U.K. Two or more people are required to form such a company, assuming it has a lawful purpose.
|
A public limited company (legally abbreviated to plc) is a type of public company (publicly held company) under United Kingdom company law, some Commonwealth jurisdictions, and the Republic of Ireland. In the United Kingdom, a public limited company usually must include the words public limited company or the abbreviation PLC or plc at the end and as part of the legal company name.
|
A Programmable Logic Controller, or PLC for short, is simply a special computer device used for industrial control systems. They are used in many industries such as oil refineries, manufacturing lines, conveyor systems and so on. Where ever there is a need to control devices the PLC provides a flexible way to softwire the components together. The basic units have a CPU (a computer processor) that is dedicated to run one program that monitors a series of different inputs and logically manipulates the outputs for the desired control.
|
what is plc
|
A Programmable Logic Controller, or PLC, is more or less a small computer with a built-in operating system (OS). This OS is highly specialized to handle incoming events in real time, i.e., at the time of their occurrence.
|
A Programmable Logic Controller, or PLC for short, is simply a special computer device used for industrial control systems. They are used in many industries such as oil refineries, manufacturing lines, conveyor systems and so on. Where ever there is a need to control devices the PLC provides a flexible way to softwire the components together. The basic units have a CPU (a computer processor) that is dedicated to run one program that monitors a series of different inputs and logically manipulates the outputs for the desired control.
|
Programmable Logic Controller (PLC) is a digital computer used for the automation of various electro-mechanical processes in industries. These controllers are specially designed to survive in harsh situations and shielded from heat, cold, dust, and moisture etc. PLC consists of a microprocessor which is programmed using the computer language. The program is written on a computer and is downloaded to the PLC via cable. These loaded programs are stored in non – volatile memory of the PLC. During the transition of relay control panels to PLC, the hard wired relay logic was exchanged for the program fed by the user
|
BREAKING DOWN 'Public Limited Company-PLC'. A limited company grants limited liability to its owners and management. Being a public company allows a firm to sell shares to investors this is benificial in raising capital. Only Public Limited Companies may be listed on the London Stock Exchange and will have the suffix PLC on their ticker symbol. A Public Limited Company's stock can be acquired by anyone and holders are only limited to potentially lose the amount paid for the shares. It is a legal form more commonly used in the U.K. Two or more people are required to form such a company, assuming it has a lawful purpose.
|
DEFINITION of 'Public Limited Company-PLC'. The standard legal designation of a company which has offered shares to the general public and has limited liability. A Public Limited Company's stock can be acquired by anyone and holders are only limited to potentially lose the amount paid for the shares. It is a legal form more commonly used in the U.K. Two or more people are required to form such a company, assuming it has a lawful purpose.
|
average temperature in Turks and Caicos
|
Aside from the idyllic seas and skies, the weather here is a big draw. The average temperature on the Turks and Caicos Islands ranges between 85° and 90°F (29°-32°C) from June to October, sometimes reaching the mid-90s (35°C), especially in the late summer months.
|
Grand Turk and South Caicos have an annual rainfall of 53 centimeters (21 in.), but as you travel farther west, the average rainfall can increase to as much as 102 centimeters (40 in.). In an average year the Turks and Caicos Islands have 350 days of sunshine.
|
July is the hottest month in Providenciales with an average temperature of 30°C (86°F) and the coldest is January at 25°C (77°F) .
|
Temperatures in Turks and Caicos during the high season average between 80 and 84 degrees Fahrenheit, and rainfall averages at about 1.7 inches, with December being the wettest month of this period.
|
It's Sunny. . . Turks and Caicos weather is sunny, sunny, sunny! The sun shines 350 days a year with an average temperature of 83°F (28°C). An added bonus is that Turks and Caicos weather is generally warmer with less rain and humidity than its Caribbean neighbors. With a Cool Breeze.
|
can you refuse a fedex delivery if it's late
|
First, DO NOT OPEN the package. Take a photograph of the package. Next, call the carrier and tell them that you wish to refuse it. They will either schedule a pickup or provide you with a location to take the package. On the call, make sure you note the reference number for the refusal so that you have records of this. Then they will give you a notification that you have a package up there. UPS and FEDEX, you can call them and they can put on your address that all packages have to be delivered to a person and not left. You can try that with DHL, I don't really know about them. Sabrina.
|
And part of that convenience is having your purchases delivered to you. FedEx makes it even more convenient by providing ways to receive your packages, even if you can’t be home to sign for them. Here are a few ways you can avoid missing an important delivery for your next online purchase. One option is to request that your package be delivered to a nearby FedEx location for pickup. Just go to fedex.com or call 1.800.GoFedEx while your package is in transit. Then, request ‘Hold at Location’ for a list of convenient FedEx locations in your area where you can pick up your package at your convenience
|
Login. This guarantee can be suspended or revoked at our sole discretion without prior notice to you. We will, at our option, and upon request, either refund or credit to the applicable invoice only your transportation charges if we deliver a shipment 60 seconds or more after the applicable delivery commitment time. Offer void where prohibited by law.
|
The Content on all pages of the FedEx Office website is provided solely for the use of FedEx Office customers to interact with FedEx Office and may not be used by You, or any other person or entity, or for any other purpose. Users do not receive any copyright in or to the Content itself. Failure to contact FedEx Office directly will cause a delay in the processing of any claim and will result in a delay in processing Your claim, which could cause You to lose the ability to receive compensation for loss involving shipping or printing services as provided in these terms and conditions.
|
For shipments receiving FedEx Ground Multiweight ® pricing, the fee is $12.50 per package up to a maximum of $39.80 per shipment. The money-back guarantee does not apply to these shipments, and we are not liable for failing to complete delivery or meet our scheduled delivery time.U.S. Fees that apply to FedEx Express ® U.S. services may also apply to FedEx Express services from the U.S. to Puerto Rico.For FedEx Express U.S. import shipments, fees vary depending on origin country; however, each fee works the same as for U.S. export.
|
what is the purpose of brit milah ceremony
|
H. The brit milah (Hebrew: בְּרִית מִילָה , [bʁit miˈla] ; Ashkenazi pronunciation: [bʁis ˈmilə] , covenant of circumcision ; Yiddish pronunciation: bris [bʀɪs]) is a Jewish religious male circumcision ceremony performed by a mohel on the eighth day of a male infant's life. A Milah L'shem giur is a Circumcision for the purpose of conversion. In Orthodox Judaism, this procedure is usually done by adoptive parents for adopted boys who are being converted as part of the adoption or by families with young children converting together.
|
The Ceremony. The ceremony of brit milah takes place on the eighth day of a baby boy’s life, even if that day falls on Shabbat or a holiday, including Yom Kippur. The only reason the ritual would not be performed is if the child is ill or too weak to safely undergo the procedure. A minyan is not required for a bris. The only people who are required to be present are the father, mohel and a sandek, who is the person who holds the baby while the circumcision is performed. Brit Milah is composed of three main parts.
|
Judaism and circumcision. Circumcision is an initiation rite for Jewish newborn babies. This usually takes place in a ceremony called a Brit (or Bris) milah witnessed by family and community members. Milah is Hebrew for Covenant of Circumcision. The ritual is an ancient practice that has been carried out by Jewish parents for more than 3,000 years. Such is the importance of Brit milah that circumcision can take place on the Sabbath or a holy day even though the drawing of blood is not normally allowed on these days under Jewish law.
|
The complete name of the ritual is bris (or brit) milah, with the second word meaning “circumcision” and the first word meaning “covenant.” The circumcision ceremony identifies the Jewish child as a member of the covenant with God by virtue of his birth as a Jew into a Jewish family.
|
Brit milah, which means covenant of circumcision, is a Jewish ritual performed on a baby boy eight days after he is born. A minyan is not required for a bris. The only people who are required to be present are the father, mohel and a sandek, who is the person who holds the baby while the circumcision is performed. Brit Milah is composed of three main parts.
|
what is a lorette
|
Lorette is a commune in the Loire department in central France, in the Gier valley. The region was developed in the 19th century for coal mining. In 1830 the Jackson brothers (Freres Frères) jackson built a steel works At assailly in what is now the north Of. lorette
|
Lorette is generally used as a girl's name. It consists of 7 letters and 2 syllables and is pronounced Lo-rette. In the U.S. in 2014 less than 5 girls were given the name. Less than 5 boys were given the name. View the Lorette Name Popularity Page to see how the popularity trend for Lorette has changed since 1880, or to compare the popularity of Lorette to other names. English names generally consist of a given name, middle name and family name. Many English speaking countries have fairly flexible naming laws. This allows the multicultural families that live in these countries to merge the naming conventions of their faiths or previous nationalities with their current homeland.
|
Lorette is a somewhat popular first name for women (#3367 out of 4276, Top 79%) and an even more popular last name for both adults and children (#49159 out of 150436, Top 33%). (2000 U.S. Census). Laura (#318 a year ago) , Lorie, Lori, Lorine, Lorna, Lorrie, Lorri, Loretta, Lorene, Laurette, Lauretta, Lollie, Lora, Lorena, Loren and Lorenza are the popular varying forms of Lorette (not ranked) .
|
Origin of LORETTE. French, from Notre Dame de Lorette, section of Paris. This word doesn't usually appear in our free dictionary, but the definition from our premium Unabridged Dictionary is offered here on a limited basis. Note that some information is displayed differently in the Unabridged
|
Lorette /lor-ette/ [2 sylls.] as a name for girls is of Latin and Italian derivation, and the meaning of Lorette is the bay, or laurel plant. Lorette is an alternate form of Laura (Latin). Laura (#318 a year ago) , Lorie, Lori, Lorine, Lorna, Lorrie, Lorri, Loretta, Lorene, Laurette, Lauretta, Lollie, Lora, Lorena, Loren and Lorenza are the popular varying forms of Lorette (not ranked) .
|
what is hematopoietic marrow
|
In addition, the bone marrow contains hematopoietic stem cells, which give rise to the three classes of blood cells that are found in the circulation: white blood cells (leukocytes), red blood cells (erythrocytes), and platelets (thrombocytes). In humans, red blood cells are produced by cores of bone marrow in the heads of long bones in a process known as hematopoiesis. On average, bone marrow constitutes 4% of the total body mass of humans; in an adult weighing 65 kilograms (143 lb), bone marrow typically accounts for approximately 2.6 kilograms (5.7 lb).
|
Hematopoietic stem cell transplants are now routinely used to treat patients with cancers and other disorders of the blood and immune systems. Recently, researchers have observed in animal studies that hematopoietic stem cells appear to be able to form other kinds of cells, such as muscle, blood vessels, and bone. The gold standard for proving that a cell derived from mouse bone marrow is indeed an HSC is still based on the same proof described above and used in mice many years ago. That is, the cells are injected into a mouse that has received a dose of irradiation sufficient to kill its own blood-producing cells.
|
Bone marrow is the flexible tissue in the interior of bones. In humans, red blood cells are produced by cores of bone marrow in the heads of long bones in a process known as hematopoiesis. On average, bone marrow constitutes 4% of the total body mass of humans; in an adult weighing 65 kilograms (143 lb), bone marrow typically accounts for approximately 2.6 kilograms (5.7 lb).
|
Foci of hematopoietic tissue form in the embryonic mesenchyma and, later, in the liver (where red and white blood cells are formed) and thymus (where lymphocytes are formed). Still later, hematopoiesis shifts to the bone marrow, and lymphocytes begin to develop in the thymus, spleen, and lymph nodes.
|
The bone marrow has two types of stem cells: mesenchymal and hematopoietic. Red bone marrow consists of a delicate, highly vascular fibrous tissue containing hematopoietic stem cells, which are blood-forming stem cells. There are two types of bone marrow: red bone marrow (also known as myeloid tissue) and yellow bone marrow (fatty tissue). 1. Both types of bone marrow are highly vascular and enriched with numerous blood vessels and capillaries. 2. The bone marrow makes more than 200 billion new blood cells every day.
|
is niagara falls part of canada
|
Niagara Falls Facts. Niagara Falls, city in the Regional Municipality of Niagara, southeastern Ontario, Canada, a port on the Niagara River opposite Niagara Falls, New York. The city overlooks the Horseshoe, or Canadian, Falls cataract of Niagara Falls; the crescent-shaped cataract is 54 M (177 ft) high and carries nine times more water than its United States counterpart.
|
Niagara Falls (/naɪˈaeɡrə/ naɪˈæɡrə-NY-ag) ra is A canadian city on the western bank of The Niagara river in The Golden horseshoe region Of Southern, ontario with a population 82,997 82997 at the 2011. Census the municipality was incorporated on 12 june. 1903 Niagara Falls and Niagara Falls, New York are linked to major highways in Canada and the United States respectively, with the Queen Elizabeth Way acting as a major artery between Toronto and Buffalo, New York.
|
Niagara Falls consists of two waterfalls on the Niagara River, which marks the border between New York and Ontario, Canada: the American Falls, located on the American side of the border, and the Canadian or Horseshoe Falls located on the Canadian side. In addition, some of the water is diverted to provide power for the United States and Canada, making Niagara Falls the largest source of electric power in the world. The Horseshoe Falls are 170 feet high. The brink of the falls is approximately 2,500 feet from one side to the other.
|
The cities of Niagara Falls, Ontario, Canada, and Niagara Falls, New York, U.S.A., are connected by two international bridges. The Rainbow Bridge, just downriver from the falls, affords the closest view of the falls and is open to non-commercial vehicle traffic and pedestrians. Niagara Falls (/naɪˈaeɡrə/ , Naɪˈæɡrə: Cayuga gahnawehtaˀ Or) tgahnawęhtaˀ is the collective name for three waterfalls that straddle the international border Between canada and The United; states more, specifically between the province Of ontario and the state Of New. York they form the southern end of The Niagara. gorge
|
There are two casinos on the Canadian side of Niagara Falls, the Niagara Fallsview Casino Resort and Casino Niagara. The former is situated in the Fallsview Tourist Area, alongside many of the area's hotels, whilst the latter is adjacent to Clifton Hill, on Falls Avenue, a major tourist promenade. Niagara Falls (/naɪˈaeɡrə/ , Naɪˈæɡrə: Cayuga gahnawehtaˀ Or) tgahnawęhtaˀ is the collective name for three waterfalls that straddle the international border Between canada and The United; states more, specifically between the province Of ontario and the state Of New. York they form the southern end of The Niagara. gorge
|
regulatory sequence definition biology
|
A regulatory sequence is a segment of a nucleic acid molecule which is capable of increasing or decreasing the expression of specific genes within an organism. Regulation of gene expression is an essential feature of all living organisms and viruses. Regulatory sequence controls when expression occurs for the multiple protein coding regions (red). Promoter, operator and enhancer regions (yellow) regulate the transcription of the gene into an mRNA. The mRNA untranslated regions (blue) regulate translation into the final protein products.
|
Regulatory gene. Definition. noun, plural: regulatory genes. A gene that is involved in the production of a substance that controls or regulates the expression of one or more genes, such as the gene that codes for a repressor protein that inhibits the activity of an operator gene. Supplement. The repressor protein binds to operator gene, which consequently prevents the production of a specific enzyme. When that enzyme is needed again, a specific regulatory metabolite inhibits the repressor so that the enzyme is produced. Also called: 1 regulator.
|
A regulator gene, regulator, or regulatory gene is a gene involved in controlling the expression of one or more other genes. Regulator genes can be located within an operon, adjacent to it, or far away from it. Other regulatory genes code for activator proteins. An activator binds to a site on the DNA molecule and causes an increase in transcription of a nearby gene. In prokaryotes, a well-known example of an activator protein is the catabolite activator protein or CAP, which is involved in positive control of the lac operon
|
Regulatory sequence controls when and where expression occurs for the protein coding region (red). Promoter and enhancer regions (yellow) regulate the transcription of the gene into a pre-mRNA which is modified to add a 5' cap and poly-A tail (grey) and remove introns. Regulatory sequence controls when expression occurs for the multiple protein coding regions (red). Promoter, operator and enhancer regions (yellow) regulate the transcription of the gene into an mRNA. The mRNA untranslated regions (blue) regulate translation into the final protein products.
|
enhancer. Enhancer sequences are regulatory DNA sequences that, when bound by specific proteins called transcription factors, enhance the transcription of an associated gene. Enhancer sequences act upon genes on the same DNA molecule; however, enhancer sequences can be located thousands of base pairs away from the transcription start site of the gene being regulated.
|
is mirin halal
|
/ Edit Post. Email. Mirin is sweet rice wine, used primarily to flavor Japanese dishes. A recent discussion on Chowhound noted that aji-mirin is the more commonly available sweetened product, easy to find in Asian groceries and some supermarkets. And while paulj thinks Kikkoman aji-mirin resembles flavored corn syrup, it's fine for many recipes.
|
However, many Hanafis regard them as haram or makrooh. While Jafari fiqh considers shrimp and prawn as halal, crab and non-scaled sea creatures (such as eel) are haram. Mirin is a Japanese condiment that has low alcoholic content, and is sometimes used in making Sushi rice. So ask the Sushi chef if they are using it or not, and if they do use it ask if it's the alcoholic version. Meat is less commonly associated with Sushi, but it isn't unheard of.
|
No Follow. When a recipe calls for mirin, the Japanese sweet rice wine, you need a combination of acidic and sweet flavors. Add between 1 and 2 tablespoons of sugar to 1/2 cup of white wine, vermouth, or dry sherry to replace 1/2 cup of mirin. Chicken Skewers with Soy-Mirin Marinade is one of our top-rated Asian recipes that uses mirin. And for more information on Japanese ingredients, see The Japanese Pantry
|
Sushi is made with sushi rice — white, short-grained, Japanese rice mixed with a dressing made of rice vinegar, sugar, and salt. Commonly sake (酒) (pronounced: sa-ki), a traditional Japanese rice wine, or mirin (みりん), a sweet Japanese cooking wine, are added to the sushi rice. Sushi rice is served topped with fresh fish, seafood, egg, fresh vegetables or pickles and served alongside slices of tender pickled ginger, wasabi paste and soy sauce. Sake is a traditional Japanese rice wine. Its color is clear to white. Sake has an alcohol content of 18-20%, compared to an alcohol content of 12% for typical grape wines. Mirin is a rice wine similar to sake, but very sweet. Mirin has an alcohol content of 14%. When called for, the typical sushi rice recipe uses ¼ cup of sake or mirin. Mirin and sake are stirred to the rice after cooking
|
For sushi to be halal, “mirin” rice wine, a major ingredient in Japanese cuisine, must be omitted. Currently, at least five Japanese restaurants and other food outlets in Singapore have been certified halal by MUIS. Most of them received the certification last year.
|
what are the group a strep species
|
Strep is short for Streptococcus, a type of bacteria. There are two types: group A and group B. Group A strep causes. 1 Strep throat-a sore, red throat, sometimes with white spots on the tonsils. 2 Scarlet fever-an illness that follows strep throat. 3 It causes a red rash on the body. 4 Impetigo-a skin infection.
|
Groups A and B are the most common and devastating human pathogens. Group A Streptococcus bacteria causes disease ranging from streptococcal sore throat (strep throat) to necrotizing fasciitis (flesh-eating disease).
|
1 The streptococci are a very heterogeneous group of bacteria. 2 Some members are a part of our normal flora while others are potent pathogens. 3 The primary pathogens are S. pyogenes and S. pneumoniae but other species can be opportunistic.
|
Group B streptococcus (GBS) has only one species, i.e., S. agalactiae, but is subclassified into 7 capsular serotypes, namely: Ia, Ib, II, III, IV, V, and VI. Type III is most commonly associated with neonatal disease while Ia and Ib with adult diseases (25, 91). GABS is discussed elsewhere in this textbook.
|
Michael Melia, M.D. Streptococcus species is a topic covered in the Johns Hopkins Antibiotic (ABX) Guide. To view the entire topic, please sign in or purchase a subscription. Johns Hopkins Guides provide diagnosis, management, and treatment guidance for infectious diseases, diabetes, and psychiatric conditions.
|
what is israel language
|
By Ariela Pelaia. Hebrew is the official language of the State of Israel. It is a Semitic language spoken by the Jewish people and one of the world’s oldest living languages. There are 22 letters in the Hebrew alphabet and the language is read from right to left.
|
Languages in Israel. Hebrew, the language of the Bible, and Arabic are the official languages of the State of Israel. Hebrew (and Arabic too) is written from right to left. It was less than a century and a half ago that Hebrew was still considered a language solely for prayer and completely obsolete on a day-to-day basis.
|
Israel's official languages are Hebrew and Arabic. 70% of the population speaks Hebrew. English is very widely taught and spoken as a second language. Israel is a melting pot of Jews from all over the world, so many more languages are spoken, including Farsi, Russian, Amharic (Ethiopian), and Yiddish; a small number also speak Ladino (Judeo-Spanish).
|
Today Hebrew is spoken by some 5 million people mainly in Israel, where it is an official language along with Arabic. and a further 2 million people speak the language in Argentina, Australia, Brazil, Canada, France, Germany, Palestinian West Bank and Gaza, Panama, the UK and USA.
|
Almost every highway and street sign is in English as well as Hebrew (and Arabic), and English language newspapers, magazine and books are available everywhere. Hebrew, the language of the Bible, and Arabic are the official languages of the State of Israel. Hebrew (and Arabic too) is written from right to left. It was less than a century and a half ago that Hebrew was still considered a language solely for prayer and completely obsolete on a day-to-day basis.
|
what to do when your toddler is throwing up
|
1 The vomit contains blood. 2 A little blood in the vomit is usually nothing to worry about, as the force of vomiting can cause tiny tears in the blood vessels lining the esophagus. 3 Your toddler's vomit may also be tinged with red if he's swallowed blood from a cut in his mouth or a nosebleed within the last six hours.
|
This gives your child’s stomach a chance to recover. Replacing fluids. Dehydration can be a problem when your child is vomiting. Begin replacing fluids after your child has not vomited for 30 to 60 minutes.
|
Call Your Pediatrician When: 1 Toddler vomiting has been for more than 24 hours. 2 For some illnesses, this is perfectly normal, but check with your doctor just to be sure. 3 Signs of becoming dehydrated, including decreased urination, dry lips and mouth, crying without tears, lethargy, and dark yellow urine.
|
When your child vomits (throws up), it’s normal to be concerned or worried. But vomiting is usually not due to a major health problem. Vomiting is most often caused by viral infection or food poisoning. It usually lasts only a day or two.
|
If your baby has bile-stained vomiting, click here-bile is bright green. More information on what causes bile-stained vomit and what to do about it. If your baby has tummy pain, click here-Information on Intussusception-babies get bouts of crying and drawing up the legs.
|
what class is a german shepherd
|
[ˈʃɛːfɐˌhʊnt]) is a breed of large-sized working dog that originated in Germany. The breed's officially recognized name is German Shepherd Dog in the English language, sometimes abbreviated as GSD , and was also formerly known as the Alsatian and Alsatian Wolf Dog in Britain. The German Shepherd is a relatively new breed of dog, with their origin dating to 1899. As part of the Herding Group, German Shepherds are working dogs developed originally for herding sheep
|
German Shepherd. World Class Canine is proud to present our genuine German Shepherd sales and breeding program. At World Class Canine we only supply and breed exceptional military grade working German Shepherd dogs that possess rock solid nerves and exceptional working drives. It is rare for a client to bring in a German Shepherd (that wasn't breed here) that possesses the drives and solid nerves required for serious protection or, patrol work. By rare I mean, your chances of winning the lotto or, finding a decent working GSD in the newspaper are about even.
|
The German Shepherd dog/puppy is a pack animal. They need you to be the leader of the pack, providing structure and guidance. You must provide an environment of trust-through training and repeitition, with appropriate verbal and non-verbal commands. THE KEY TO TRAINING IS CONSISTENCY & PRACTICE ...
|
We're so confident in our World Class Gunbil German shepherds breeding program that we offer a WORRY FREE FIVE YEAR genetic HEALTH and TEMPERAMENT GUARANTEE ! In the event that the guarantee is honored, Gunbil German Shepherds will provide another dog of the same quality, age, gender (of choice) and value.
|
Begin your training attempts with a German Shepherd puppy when it is around 8 weeks old. Although any German Shepherd dog is trainable, they are very strong and powerful animals. If you start out with a puppy, you have the opportunity to shape and mold its personality and develop your relationship early. 1 If you happen to get an older dog, adult dogs can still be trained effectively.
|
what is the maximum compensation for unfair dismissal
|
The tribunal will need to identify an appropriate cut-off point for compensation if you have not secured any new employment as at the hearing date. The maximum amount that you can be awarded as compensation for Unfair Dismissal is presently the statutory cap of £78,335, or 52 weeks gross salary-whichever is the lower. This is in addition to the basic award which can be ordered by the Tribunal of up to a maximum of £14,250. These figures are correct as at 2015. If there is a dismissal, the onus is on an employer to show that the reason (or if more than one, then the principal reason), for dismissing an employee falls into one of the categories set out in the Employment Rights Act 1996. These categories are as follows:
|
Further, there is no upper limit on the compensation that can be awarded for discrimination claims under the Equality Act 2010. In practice. In reality, in 2011 / 2012, the median award for unfair dismissal claims was £4,560. Therefore, many compensatory awards are unlikely to be affected by the new limit. However, the government considered there to be ‘broad support’ for a cap linking the maximum potential award to an individual’s own salary.
|
This is what usually happens if the employee wins their case. This is split into the Basic Award and the Compensatory Award. The maximum an employee can be awarded in compensation for unfair dismissal is £ 92,585 - the maximum amounts under the Basic Award and Compensatory Award combined.
|
The time limit for lodging a claim for unfair dismissal at a Tribunal is three months, less one day, from the effective date of termination of the contract of employment. This time limit is strictly applied. Certain dismissals are automatically unfair in which case the employee just has to show that the dismissal was for one of the following reasons: 1 Membership (or non membership) of a trade union or for trade union activities. 2 Health and safety.
|
The maximum payout for unfair dismissal at tribunal will be capped at one year’s salary, as part of a raft of measures aimed at making it easier to dismiss underperforming staff, the Government announced. The Government has announced further measures to cut red tape for business. There are no plans to change the maximum payout, the Business Department said. In reality, the typical payout for unfair dismissal is only round £5,000, according to BIS, with only one in 350 people receiving an award worth more than their own salary.
|
h1b dependent visa processing time
|
The H1B processing time varies because all cases are different. Generally it takes between three to six months to process an H-1B visa. You must wait at least two weeks after you send in your application for a receipt from the USCIS and another two weeks before you call the USCIS to check the status.
|
However, if that office is taking longer than the visa processing time goal (including H1B processing) to handle the visa form type in question, you will see the filing date (e.g., April 10, 2003) of the last case that was processed on the date the chart was last updated.
|
The H1B visa classification permits a foreign national to work in the United States for a temporary period. It is available for offers of employment that are in a specialty occupation*. A person may hold H1B status for a maximum of six years, and it may be issued in increments of up to three years by the USCIS.
|
H1B Visa Application Process-H1B Regular Processing H1B visa applications can be filed by US employers one of 2 methods: - H1B Regular Processing, or-H1B Premium Processing The difference is that H1B Premium Processing is a faster method to obtain an H1B visa. There is no set timeframe for a visa to be processed by the USCIS when filed through Regular Processing (it can take anywhere from 1 month to 6 months) Below is an outline for the Regular H1B visa Processing method. H1B Visa - ' Regular' Application Process: 1
|
7. Wait for the H1B petition to be processed. Processing times vary depending upon service center and the visa. It could be a few months wait. If the H1B employer can show a substantial need for the employee, USCIS might approve the petition sooner. There is no set timeframe for a visa to be processed by the USCIS when filed through Regular Processing (it can take anywhere from 1 month to 6 months) Below is an outline for the Regular H1B visa Processing method. H1B Visa - ' Regular' Application Process: 1
|
h1b dependent visa processing time
|
Family of (Spouse and unmarried children under 21) of an H1 visa holder is eligible to get H-4 visas to live in US. There is no additional qualification required for H4 visa. The duration of H4 visa is the same as H1B visa of the principal. H4 visa holders are not allowed work in US and are also not eligible to get a Social Security Number. H1 Visa holders can get drivers license and get and tax payer id for tax purpose. H4 visa holders can apply for other nonimmigrant such as the F-1 (student Visa). H4 Visa applicants can apply for employment, get H1B visa and legally work in US. H4 visa can be obtained at local US consulate office in applicant’s home country. If the applicant (H4 Visa applicant) is already in the US, then H-4 visa can be obtained by filing Form I-539. (TOP)
|
H1B Visa Premium Processing. As the name suggests, the Premium Processing Service allows a faster processing time after the H1 visa petition is received. The U.S. Citizenship and Immigration Service (USCIS, formerly the INS) guarantee that it will process the visa petition within 15 days under this service.
|
However, if that office is taking longer than the visa processing time goal (including H1B processing) to handle the visa form type in question, you will see the filing date (e.g., April 10, 2003) of the last case that was processed on the date the chart was last updated.
|
If you're a worker with legal nonimmigrant status, you can apply for dependent visas for your children and spouse so they can join you for as long as your visa is valid. A dependent visa, also called an H-4 visa, can be applied for any time after your H-1B petition is approved. Read on to learn the procedure for applying for a dependent visa from outside the US, and applying for an extension from inside the US. In order to apply for the H-4 visa, you will need the following documents: 1 A copy of the H-1B approval form (form I-797). 2 A marriage certificate or birth certificate showing the relationship between the H-1B holder and child or spouse.
|
7. Wait for the H1B petition to be processed. Processing times vary depending upon service center and the visa. It could be a few months wait. If the H1B employer can show a substantial need for the employee, USCIS might approve the petition sooner. There is no set timeframe for a visa to be processed by the USCIS when filed through Regular Processing (it can take anywhere from 1 month to 6 months) Below is an outline for the Regular H1B visa Processing method. H1B Visa - ' Regular' Application Process: 1
|
what is incubation period for pink eye
|
Incubation period for pink eye caused by virus is around 12 hours to 3 days and a person can go back to work or school when the symptoms improve. That would be in 3 to 5 days. For bacterial infection, the person can go back to work 24 hours after antibiotic has been administered and symptoms start improving. Incubation Period for Pink Eye. Conjunctivitis is also referred to as red eye and is quite common. It is also called infectious conjunctivitis. The front of the eye is covered with a thin tissue layer which gets red and inflamed.
|
For someone with pink eye caused by a virus, the person can be contagious for up to 14 days from the time that symptoms first appear. Keep in mind that just because you or your child was given an antibiotic, this does not necessarily mean that it is bacterial conjunctivitis.
|
The incubation period for pink eye will vary, depending on whether it is caused by bacteria or a virus and the specific type. For a viral infection, generally 12 hours to three days later, signs and/or symptoms of pink eye will appear. Incubation Period for Pink Eye: An Overview. Pink eye is the layman's term for conjunctivitis. Conjunctivitis is inflammation of the conjunctiva, which is a clear, thin piece of tissue that covers the whites of the eyes and the inner eyelids. There are several reasons why the conjunctiva can become inflamed.
|
1. Pink eye caused by virus or bacteria is highly contagious, but during the incubation period for pink eye, it is not contagious. Bacterial conjunctivitis becomes contagious when the symptoms start to appear and continue for 24 hours after an antibiotic is given. Incubation Period for Pink Eye. Conjunctivitis is also referred to as red eye and is quite common. It is also called infectious conjunctivitis. The front of the eye is covered with a thin tissue layer which gets red and inflamed.
|
The incubation period for pink eye can range from a couple of days to a couple of weeks. More Info: Conjunctivitis, more commonly referred to as pink eye, can be caused by a variety of factors. The incubation period, that is the span of time that elapses between a person coming in contact with the infection and the symptoms ultimately appearing, depend upon what has caused the infection.
|
what organelles stores food wastes products and other materials
|
The vacuole is the organelle that stores food, water, and waste. They're are present in both plant and animal cells, but are more prominent in plant cells. The central vacuole, an organelle that a plant cell has that an animal cell doesn't have, stores food, water, and wastes. The central vacuole also supports the plant cell's st … ructure when full. The vacuole (in both plants and animals) has the same function but isn't big enough to support the cell's structure
|
Question and answer. Which organelle is used as temporary storage for water, waste products, food, and other cellular material? Vacuole is used as temporary storage for water, waste products, food, [ and other cellular material. ].
|
Vacuole (12) A sac of fluid surrounded by a membrane FUNCTION-stores food, enzymes, and other materials for the cell. Some store waste products. Plant Cells have one LARGE vacuole that contains water and other substances.
|
An active cell constantly produces waste products. cytoplasm, organelles called lysosomes contain chemicals. (enzymes) that digest wastes and worn-out cell parts. These. chemicals also break down food. These organelles are found primarily in animal cells. Cells require a continuous supply of energy. The cell wall is a rigid structure outside the cell membrane that. supports and protects the cell (for plants, fungi, and some. protists and bacteria). The cell wall is made of tough cellulose fibers and other. materials made by the cell. Note: fungal cell walls contain chitin. instead of cellulose.
|
Cell Parts and Organelle Functions -. The cell membrane (or plasma Membrane) is a structure that forms the outer boundary of the cell and allows only certain materials to move into and out of the cell. Food, oxygen and water move into the cell through the membrane. Waste products also leave through the membrane. The cell wall is a rigid structure outside the cell membrane that. supports and protects the cell (for plants, fungi, and some. protists and bacteria). The cell wall is made of tough cellulose fibers and other. materials made by the cell. Note: fungal cell walls contain chitin. instead of cellulose.
|
what is government island vancouver, wa
|
Vancouver Island is separated from mainland British Columbia by the Strait of Georgia and Queen Charlotte Strait, and from Washington by the Juan De Fuca Strait. Vancouver Island, located in British Columbia, Canada, is the largest Pacific island east of New Zealand. While the city of Vancouver stands on the North American mainland, Victoria, the capital city of British Columbia, is located on the island. Along with most of the southern Gulf Islands, plus various minor islands offshore from its southern end, the southern part of Vancouver Island is the only part of British Columbia (and of Western Canada) that lies south of the 49th Parallel.
|
Government Island, a historic 18th and 19th century quarry site provided Aquia sandstone for the construction of the U.S. Capitol and the White House and other historic buildings in Washington, D.C. Today this 17-acre park is a historic scenic nature preserve and archaeological site. Located in the middle of Stafford I-95 exit 140, Visit the quarry where the U.S. Government's most famous buildings were born.
|
Most of the island is owned by the Port of Portland. The Port acquired the entire island (as well as adjacent Lemon Island and McGuire Island) in 1969 in order to expand nearby Portland International Airport. (Although there is a city controlled locked gate in the 205 fence.) Government Island is known for its great blue heron colony and the Government Island State Recreation Area (primitive camping, beaches).
|
Downstream side of the Interstate-205 Bridge as seen from Marine Drive, Oregon. Government Island is to the left and the Oregon banks of the Columbia River are to the right. Mount Hood, Oregon, is in the background. Columbia River and Government Island complex, looking upstream, as seen from Rocky Butte. View of the Columbia River, with Government Island (left on river) and McGuire Island (center of river). McGuire Island is part of the Government Island complex. Image taken June 15, 2005.
|
The downstream tip of Government Island (downstream of the Interstate 205 Bridge) is Lemon Island, and two smaller islands are on the north side of Lemon Island. The larger (0.8-miles in length) is referred to as Tri-Club Island, and the smaller is unnamed. Columbia River and Government Island complex, looking upstream, as seen from Rocky Butte. View of the Columbia River, with Government Island (left on river) and McGuire Island (center of river). McGuire Island is part of the Government Island complex. Image taken June 15, 2005.
|
what function do afferent and efferent nerves/neurons serve
|
(April 2014). In the peripheral nervous system, an afferent nerve fiber is the nerve fiber (axon) of an afferent neuron (sensory neuron). It is a long process (projection) extending far from the nerve cell body that carries nerve impulses from sensory receptors or sense organs toward the central nervous system. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). A touch or painful stimulus, for example, creates a sensation in the brain only after information about the stimulus travels there via afferent nerve pathways.
|
Afferent and efferent neurons are the two types of nerve fibers that perform these functions. We do a comparison between the two. Before we proceed to the comparison between afferent vs. efferent neurons, it is imperative that we gain some insight into the processing of impulses by the nervous system. Afferent neurons are connected to efferent neurons via multipolar neurons called interneurons. Interneurons are also called relay, association, or local circuit neurons. Similar to efferent neurons, the cell bodies of interneurons are located inside the central
|
There are many types of neurons in your body that help you see, smell, hear, and move. In this lesson you'll learn more about afferent, efferent, sensory, and motor neurons. Test your knowledge at the end with a quiz. When you first smelled the sock, you were able to send signals up to your brain which registered inside of the brain as a certain type of smell. The nerves responsible for sensing a stimulus and sending information about the stimulus to your central nervous system are called afferent neurons.
|
The neuron is a single nerve cell, and you have billions of them. There are three basic types of neurons: association, afferent, and efferent. The association neurons comprise the central nervous system (CNS) that is the brain and spinal cord. The afferent neurons are also known as the sensory neurons: they bring the stimuli from the sensors (e.g., skin, eyes, ears) to the CNS.
|
The opposite direction of neural activity is afferent conduction. In the nervous system there is a closed loop system of sensation, decision, and reactions. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). The motor nerves are efferent nerves involved in muscular control. In the peripheral nervous system, an efferent nerve fiber is the nerve fiber (axon) of an efferent neuron (motor neuron).
|
what function do afferent and efferent nerves/neurons serve
|
They carry nerve impulses from your sensory organs, like your eyes, to your brain, or your central nervous system (CNS). When your eyes see something shiny on the ground, your afferent nerves tell your brain what your eyes see. In contrast, efferent nerves carry nerve impulses from your brain to parts of your body. So, when you see something shiny on the ground, your brain tells you to pick it up and look at it. Efferent = Exiting, the nerves impulses are exiting your brain. Afferent = the opposite
|
The opposite direction of neural activity is afferent conduction. In the nervous system there is a closed loop system of sensation, decision, and reactions. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). The motor nerves are efferent nerves involved in muscular control. In the peripheral nervous system, an efferent nerve fiber is the nerve fiber (axon) of an efferent neuron (motor neuron).
|
The neuron is a single nerve cell, and you have billions of them. There are three basic types of neurons: association, afferent, and efferent. The association neurons comprise the central nervous system (CNS) that is the brain and spinal cord. The afferent neurons are also known as the sensory neurons: they bring the stimuli from the sensors (e.g., skin, eyes, ears) to the CNS.
|
The opposite direction of neural activity is efferent conduction. In the nervous system there is a closed loop system of sensation, decision, and reactions. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). A touch or painful stimulus, for example, creates a sensation in the brain only after information about the stimulus travels there via afferent nerve pathways.
|
There are many types of neurons in your body that help you see, smell, hear, and move. In this lesson you'll learn more about afferent, efferent, sensory, and motor neurons. Test your knowledge at the end with a quiz. When you first smelled the sock, you were able to send signals up to your brain which registered inside of the brain as a certain type of smell. The nerves responsible for sensing a stimulus and sending information about the stimulus to your central nervous system are called afferent neurons.
|
what function do afferent and efferent nerves/neurons serve
|
Therefore, afferent and efferent neurons use a neuron which forms a connection between two or more neurons that we synonymously call an interneuron or association neuron. This is the most abundant type of neuron in your body. When you first smelled the sock, you were able to send signals up to your brain which registered inside of the brain as a certain type of smell. The nerves responsible for sensing a stimulus and sending information about the stimulus to your central nervous system are called afferent neurons.
|
Afferent neurons' somas are located in the ganglia of the peripheral nervous system, and the axons of these cells travel from ganglion to ganglion and lead back to the spinal cord. The majority of these are unipolar neurons in that they have a single axon leaving the cell body and is sent towards the sensory organ. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). A touch or painful stimulus, for example, creates a sensation in the brain only after information about the stimulus travels there via afferent nerve pathways.
|
The opposite direction of neural activity is efferent conduction. In the nervous system there is a closed loop system of sensation, decision, and reactions. This process is carried out through the activity of afferent neurons (sensory neurons), interneurons, and efferent neurons (motor neurons). A touch or painful stimulus, for example, creates a sensation in the brain only after information about the stimulus travels there via afferent nerve pathways.
|
The neuron is a single nerve cell, and you have billions of them. There are three basic types of neurons: association, afferent, and efferent. The association neurons comprise the central nervous system (CNS) that is the brain and spinal cord. The afferent neurons are also known as the sensory neurons: they bring the stimuli from the sensors (e.g., skin, eyes, ears) to the CNS.
|
There are many types of neurons in your body that help you see, smell, hear, and move. In this lesson you'll learn more about afferent, efferent, sensory, and motor neurons. Test your knowledge at the end with a quiz. When you first smelled the sock, you were able to send signals up to your brain which registered inside of the brain as a certain type of smell. The nerves responsible for sensing a stimulus and sending information about the stimulus to your central nervous system are called afferent neurons.
|
what does porifera mean
|
the phylum porifera consists of the sponges to make it into the porifera phylum an animal must have no true tissue some contain spicules a skeletal element and all contain choanocysts a type of cell which move water through the porous bodies of poriferas porifera also have totipotent cells which have the cabalitity of changing into whatever type of cell is needed by the organism
|
porifera means pore bearing sponges are covered with tiny pores on the outside called ostia 2 ostia lead to an internal system of canals which leads to one or more larger holes called oscula which are the openings to the out side ostia are surrounded by donut shaped cells called porocytes the life of a sponge elephant ear sponge 2006 richard ling the word sponge for most of us relates to the scrubbing sponge or a bath sponge it is easy to forget that there is much more to sponges than the scrubbing and bath the sponges are living animals that live in the water
|
reproduction by sponges is by both sexual and asexual means asexual reproduction is by means of external buds some species also form internal buds called gemmules which can survive extremely unfavorable conditions that cause the rest of the sponge to die sexual reproduction takes place in the mesohyl other characteristics of sponges include a system of pores also called ostia and canals through which water passes water movement is driven by the beating of flagellae which are located on specialized cells called choanocytes collar cells
|
unlike the cells of most other animals the cells of sponges do not form into various organs like kidney liver or nerves sponge cells are totipotent dawkins 2004 the totipotent cells could give rise to reproductive cells or other types of cells of the organism the life of a sponge elephant ear sponge 2006 richard ling the word sponge for most of us relates to the scrubbing sponge or a bath sponge it is easy to forget that there is much more to sponges than the scrubbing and bath the sponges are living animals that live in the water
|
sponges are classified in the phylum porifera a word that comes from the latin words porus pore and ferre bear meaning pore bearer this is a reference to the numerous holes pores on the sponge s surface sponges do not have tissues or organs like some animals do but they have specialized cells to perform necessary functions these cells each have a job some are in charge of digestion some reproduction some bringing in water so the sponge can filter feed and some for getting rid of wastes
|
are mack tuna good eating
|
The only time I have ever eaten mack tuna was at the Mackerel Islands one year when a Greek friend baked one up with garlic and vegetables – it tasted pretty good too, given that it looked so bloody and uninviting when he prepared it. Most readers will have eaten mack tuna in its canned form. Mack tuna are members of the very important family Scombridae that includes all mackerel, tuna and bonito. Size. The Australian all-tackle game fishing record stands at 11.8 kilos, taken in Queensland back in 1973. The West Australian record is a bit smaller at 8.9 kilos taken off Exmouth in 1995 by Geoff Moyle.
|
Haven't tried this with mack tuna, but have done it with tailor which has a similar soft oily flesh and came out pretty good. Usually eat it as a starter or snack before main meal. I usually just eyeball the ingredients, but below is an approximation for one fillet off the fish you are holding. Of course that means you have lot of leftover tuna. #Which is just perfect as snapper bait ... #8-). Last, I'm a great believer in making sure ingredients go together. #Dipping mack tuna in beer batter and deep frying it might make sense (maybe) but it's definitely not going to taste like snapper.
|
Canned tuna is inexpensive and packed with protein. The fish is mild in flavor and versatile enough to include in a variety of nutritious recipes. Opt for tuna canned in water, and a serving contains less than 1 gram of fat and only about 100 calories. You'll also get a good dose iron and potassium as well. While you shouldn't eat tuna every day because of its mercury content, you can still safely enjoy canned tuna as a regular part of your healthy eating plan. Omega-3 Fatty Acids. The small amount of fat present in canned light tuna is mostly the healthy unsaturated kind, including omega-3 fatty acids. Omega-3 fatty acids support a healthy brain and promote proper growth and development.
|
Ask any bodybuilder or fitness-lover what he or she thinks of canned tuna and there's a good chance that you'll get this answer: Canned tuna is a time-saving miracle food, said with eyes full of wonder and happiness. Of course, you have to like tuna to eat canned tuna. As far as meal-in-a-can foods go, tuna is bland.
|
Re: Mack Tuna: *Eating Qualities. Most of the time when people tell you something tastes crap, it's just them having a wank about how much they know. I was told the 3 kilo Bonito I once bought from the co-op wouldn't even impress my cat. It was beautiful. Speak up if so as I have your gloves. We filleted a mack tuna that a "matt" hit at fishrock at SWR. Nice fish but when we filleted it the flesh was blood black and really didnt look inviting. We didnt bleed it so that would prob be a major factor. Befor we go out again matt can you fix your inside leg seem.
|
what does payroll mean
|
A payroll is a company's list of its employees, but the term is commonly used to refer to: 1 the total amount of money that a company pays to its employees. 2 a company's records of its employees' salaries and wages, bonuses, and withheld taxes. 1 the total amount of money that a company pays to its employees. 2 a company's records of its employees' salaries and wages, bonuses, and withheld taxes. 3 the company's department that calculates and pays these.
|
Payroll taxes are taxes imposed on employers or employees, and are usually calculated as a percentage of the salaries that employers pay their staff. Payroll taxes generally fall into two categories: deductions from an employee’s wages, and taxes paid by the employer based on the employee's wages.
|
Answer. Arrears payroll means employees are paid approximately two weeks after the end of a pay cycle. Employees are paid for the 1st-15th of each month at the end of that month. Then employees are paid for the 16th-31st of each month in the middle of the following month (15th or 16th).
|
Definition. Gross payroll is the total amount of money designated for a particular employee or for all employees in the business, depending on how the term is being used. The goal is to provide a maximum figure that can be easily examined by managers, payroll employees and analysts. Elements. Gross payroll is made out of several elements. The major component is the main form of compensation, given in either a wage or a salary. But many employees also receive money from bonuses, overtime, pay for time off and time sick and payment allowances for tools and services they need to buy.
|
• PAYROLL (noun). The noun PAYROLL has 3 senses: 1. a list of employees and their salaries. 2. the total amount of money paid in wages. 3. the department that determines the amounts of wage or salary due to each employee. Familiarity information: PAYROLL used as a noun is uncommon.
|
how much does a surgeon make an hour
|
The median hourly wage for a general surgeon ranges from between $56.44 – $111.32 per hour. Some of the best paying states for general surgeons are New York $300,000, Houston $264,000, Miami $255,000, Los Angeles $287,000 and Seattle $280,000. general surgeon salary.
|
Average orthopedic surgeon salary. The median expected salary for an orthopedic surgeon in the United States is about $412,453 per annum while an average hourly wage based on the size of work setting and medical experience ranges from $26,00 to $204,50 per hour.
|
According to percentiles, the median salary for 90th percentile of orthopedic surgeons has been around $686,289 per year. Similarly, about 75th percentile of orthopedic surgeons received about $555,789, 25th percentile of them received $324,032 while 10th percentile received $243,530 per year.
|
more than $50 an hour....depending on the type of surgeon. a surgeon makes $189,000 a year on average. that averages out to $517 a day or $21.58 an hour of he works 24/7 365 days a year. or if he/she works only week days they would make $724 a day or$31.21 an hour.
|
General surgeon salary and wage in USA. Based on percentiles, the median yearly salary for 90th percentile of surgeons has been around $419,139. Similarly, about 75th percentile of surgeons received $367,032, 25th percentile of them received $271,246 while 10th percentile received $236,145 per year.
|
what is a rash
|
A rash is an inflammatory reaction of the skin. Rashes can be caused by a wide variety of mild to serious diseases, disorders and conditions. Rashes can affect a small area of the skin or the full body and occur in all age groups and populations. Rashes vary greatly in appearance, extent and severity, depending on the underlying cause. Rashes can be red, white, purple or silver in color, and raised, bumpy or flat in texture.
|
Heat rash (prickly heat) is a red or pink rash usually found on body areas covered by clothing. It can develop when the sweat ducts become blocked and swell and often leads to discomfort and itching. Heat rash is most common in babies, but it may affect adults in hot, humid climates. Heat rash looks like dots or tiny pimples. In young children, heat rash can appear on the head, neck, and shoulders. The rash areas can get irritated by clothing or scratching, and, in rare cases, a secondary skin infection may develop.
|
Rash facts. 1 Rash is not a specific diagnosis. 2 Common rashes include eczema, poison ivy, hives, and heat rash. 3 Infections that cause rashes may be fungal, bacterial, parasitic, or viral. 4 Over-the-counter products may be helpful treatments for many skin rashes. 5 Rashes lasting more than a few days that are unexplained should be evaluated by a doctor. Rash facts. 1 Rash is not a specific diagnosis. 2 Instead it means skin inflammation and discoloration that changes the way the skin looks. 3 Common rashes include eczema, poison ivy, hives, and heat rash. 4 Infections that cause rashes may be fungal, bacterial, parasitic, or viral
|
A rash is a noticeable change in the texture or color of the skin. The skin may become itchy, bumpy, chapped, scaly, or otherwise irritated. Rashes are caused by a wide range of conditions, including allergies, medication, cosmetics, and various diseases. Other types of rashes include: 1 eczema: a common rash for people with asthma or allergies. 2 The rash is often reddish and itchy, with a scaly texture. 3 bug bites: tick bites are of particular concern, as they can transmit disease. 4 psoriasis: a scaly, itchy, red rash that forms along the scalp and joint
|
Rash. A person with a generalized rash has a rash that covers most of the body, or has a rash in several locations on the body. A person with a localized rash has a rash that is present in only one location on the body. Common causes of generalized rash include viral infections and allergic reactions. Common causes of localized rash include skin sensitivity and bacterial infections.
|
what is a major landform in east africa
|
Landforms. The Great Rift Valley is like a jagged scar on the face of Africa. It extends from South Africa, along the eastern region, and up to the Arabian Peninsula. The Great Rift Valley is a long line of escarpments that have been created by two tectonic plates drifting apart.
|
The Great Rift Valley is a series of rifts and valleys running from north to south across the whole of East Africa. The African continent is gradually splitting in two along these fault lines.
|
The Great Rift Valley is like a jagged scar on the face of Africa. It extends from South Africa, along the eastern region, and up to the Arabian Peninsula. The Great Rift Valley is a long line of escarpments that have been created by two tectonic plates drifting apart.
|
Dividing these highlands is the Great Rift Valley. In East Africa, where it forms two arms (eastern and western), the Great Rift Valley has a series of lakes on its floor and all around it.
|
It is sometimes called the Roof of Africa for its height and large area. Great Rift Valley: A dramatic depression on the earth's surface, approximately 4,000 miles (6,400 km) in length, extends from the Red Sea area near Jordan in the Middle East, south to the African country of Mozambique.
|
normal range thyroid levels
|
Speaking roughly, normal levels of thyroid-stimulating hormone (TSH) are in the range of 0.4 to 4.0 mIU/L. However, each laboratory and test manufacturer identifies its own normal TSH range. This is based on the test, the equipment being used, and the patients being tested.
|
The range for normal values is 100 to 200 nanograms per deciliter, according to Medline Plus. Greater-than-normal values may be due to hyperthyroidism, thyroid cancer or high levels of a protein that carries T3 in the blood. Lower-than-normal values may indicate hypothyroidism, starvation or a long illness.
|
Clinical chemists and doctors decided decades ago that healthy people with normal functioning thyroid glands have TSH levels within a range of 0.450 to 4.500 mIU/L (and some labs go as high as 5.000mIU/L). In clinical shorthand, the diagnostic range is rounded out to 0.4-4.0.
|
Results. A thyroid-stimulating hormone (TSH) blood test is used to check for thyroid gland problems. The normal values listed here-called a reference range-are just a guide. These ranges vary from lab to lab, and your lab may have a different range for what's normal.
|
If you go by TSH normal ranges your score is normal, however TSH alone does not give a full picture of thyroid health. Insist on testing for Free T4, Free T3, Reverse T3, thyroid antibodies, ferritin and D3 as the first step. One test is just not enough to get a full picture.
|
how do you cook tilapia in the oven
|
Preheat oven to 375 degrees F. Coat a large cast iron pan with a nonstick butter spray. Rinse fish and pat dry; place on the cast iron pan. Season each fillet with salt, cracked pepper, lime zest and lime juice. Add fish to the pan. Place a pat of butter on each fillet and cook in the oven for 8 to 12 minutes.
|
Mix together the lemon juice, butter, and black pepper. Combine the ingredients in a small dish. 1 You can also add other seasonings, like chopped herbs or onion powder, if desired. 2 Use no more than 1/4 tsp (1.25 ml) concentrated powders, 1 tsp (5 ml) dried herbs, or 1 Tbsp (15 ml) fresh herbs. 1 You do not need to add the tomato, but the benefit of cooking tilapia in foil packets is that you cook vegetables with the fish while infusing the fillets with the flavor. 2 You can also layer chopped green onion, chopped sweet onion, or chopped bell peppers over the fish.
|
1 Place the tilapia fillets in the bottom of the baking dish and dot with butter. 2 Season with Old Bay seasoning and garlic salt. 3 Top each one with a slice or two of lemon. 4 Arrange the frozen mixed vegetables around the fish, and season lightly with salt and pepper. 1 Preheat the oven to 375 degrees F (190 degrees F). 2 Grease a 9x13 inch baking dish. 3 Place the tilapia fillets in the bottom of the baking dish and dot with butter. 4
|
1 Place fillets in baking dish. 2 Pour lemon juice over fillets, then drizzle butter on top. 3 Sprinkle with garlic, parsley, and pepper. 4 Bake in preheated oven until the fish is white and flakes when pulled apart with a fork, about 30 minutes. 1 Pour lemon juice over fillets, then drizzle butter on top. 2 Sprinkle with garlic, parsley, and pepper. 3 Bake in preheated oven until the fish is white and flakes when pulled apart with a fork, about 30 minutes.
|
1 Grease a 9x13 inch baking dish. 2 Place the tilapia fillets in the bottom of the baking dish and dot with butter. 3 Season with Old Bay seasoning and garlic salt. 4 Top each one with a slice or two of lemon. 5 Arrange the frozen mixed vegetables around the fish, and season lightly with salt and pepper. 1 Preheat the oven to 375 degrees F (190 degrees F). 2 Grease a 9x13 inch baking dish. 3 Place the tilapia fillets in the bottom of the baking dish and dot with butter. 4
|
how much to renew ohio cosmetology license
|
Ohio Cosmetology License Renewal. Ohio licenses must be renewed January 31 every odd-numbered year. It costs $45 to renew your license, and the board requires at least 8 hours of cosmetology continuing education classes. If the renewal is late, it's $90. If you get an independent contractor's license, the license is $60 if renewed on time, $105 if late. The original cost of the independent contractor's license is $75
|
- If renewing via paper form, you must also submit Form R4000. - If you transition this license to the barbering equivalent the current cosmetology license will expire and you will be issued a new license upon completion of renewal. - Your license status must be in good standing before being placed on Inactive Status. If you missed the 2011 renewal, you must have completed the 2011 Continuing Education requirements and pay the $25 late fee before you can be placed on Inactive Status. - The 2013 renewal fee is prorated to $41 for
|
May 2014 PERSONAL LICENSE RENEWAL Mail this form and a separate check or money order (do not send cash) with the applicable fee for each renewal to the address above. Make payable to the Board of Barbering & Cosmetology (Incomplete forms will not be processed).
|
Ohio Cosmetology License Renewal. Ohio licenses must be renewed January 31 every odd numbered year. It costs $45 to renew your license and the board requires at least 8 hours of cosmetology continuing education classes. If you try to renew late it will cost $90. If you get an independent contractors license the license is $60 if renewed on time, $105 if late. Below are the requirements on how to get a Ohio cosmetology license, renew your license or if you need to transfer your cosmetology license in Ohio to a different state. If you have questions or issues about these requirements for cosmetology, you can contact the Ohio state board of cosmetology.
|
You can meet the requirements through online renewal or via paper form. - If renewing via paper form, you must also submit Form R4000.- If you transition this license to the barbering equivalent the current cosmetology license will expire and you will be issued a new license upon completion of renewal. - Your license status must be in good standing before being placed on Inactive Status. If you missed the 2011 renewal, you must have completed the 2011 Continuing Education requirements and pay the $25 late fee before you can be placed on Inactive Status. - The 2013 renewal fee is prorated to $41 for
|
what ethnicity is john schnabel
|
Big Nugget Mine Edit. 91 year old John had been the boss of the mine, when in 2011 (season 2), he gave it to his 17 year old grandson Parker Schnabel. John was around to help his grandson with the mine. In season 4, John resumed running the mine. John found over 50 ounces of gold and very large nuggets in one day on McKilrevie Bench. Early life Edit. John was born in 1920. He lived in Kansas, the son of a wheat farmer. When he became a teen, the country was mired in the Great Depression, and the family had lost the farm. He was raised in southern Oregon. At the age of 17, John chopped off his big toe while he was logging.
|
By season Edit. In season 2. He has worked at the Big Nugget Mine for many years, under the direction and order of his grandfather, John Schnabel. During the Hoffman's second season, Parker was given the mine when John decided to step down.
|
$5 Million. Tony Beets net worth and salary: Tony Beets is an Dutch-Canadian miner and reality telvison personality who has a net worth of $5 million dollars. Born in Wijdenes, Netherlands, Tony Beets worked for his family for many years, and then relocated to Canada to seek better career opportunities.
|
HOMETOWN: Haines, AK. Gold fever is in Parker's blood. Ever since he can remember, Parker's beloved Grandpa Schnabel has been running the family gold mine, Big Nugget. Since Parker's feet could reach the pedals, he's been operating heavy machinery and learning the trade.
|
The Young Master. Parker Schnabel is a miner and member of the Schnabel family. Parker's net-worth is about 10,000,000.00 $US. Parker is the spitting image of someone who is strikingly similar in appearance to his grandfather when his grandpa was a teen. In season 2. He has worked at the Big Nugget Mine for many years, under the direction and order of his grandfather, John Schnabel. During the Hoffman's second season, Parker was given the mine when John decided to step down.
|
how did the environmental protection agency start
|
The EPA was proposed by President Richard Nixon and began operation on December 2, 1970, after Nixon signed an executive order. The order establishing the EPA was ratified by committee hearings in the House and Senate. The agency is led by its Administrator, who is appointed by the president and approved by Congress. In 1970, President Richard Nixon proposed an executive reorganization that would consolidate many of the federal government's environmental responsibilities under one agency, a new Environmental Protection Agency. That reorganization proposal was reviewed and passed by the House and Senate.
|
The Environment Agency (EA) is a non-departmental public body, established in 1996 and sponsored by the United Kingdom government 's Department for Environment, Food and Rural Affairs (DEFRA), with responsibilities relating to the protection and enhancement of the environment in England (and until 2013 also Wales). The Environment Agency's remit covers the whole of England, about 13 million hectares of land, 22,000 miles (35,000 km) of river and 3,100 miles (5,000 km) of coastline seawards to the three-mile limit which includes 2 million hectares of coastal waters.
|
About ENERGY STAR. ENERGY STAR is a U.S. Environmental Protection Agency (EPA) voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. The ENERGY STAR program was established by EPA in 1992, under the authority of the Clean Air Act Section 103(g).
|
In 1990, the Environmental Protection Agency (EPA) identified the byproducts of wood preserving processes as hazardous waste and began regulating the industry in 1991. The hazardous waste K-list from the Environmental Protection Agency identifies source-specific wastes. It lists wastes from specific industries including pesticide manufac … turing and petroleum refining.
|
RTImages/Shutterstock. It's one of those facts that sweeps you back into an alien, almost unrecognizable era. On July 9, 1970, Republican President Richard Nixon announced to Congress his plans to create the Environmental Protection Agency and the National Oceanic and Atmospheric Administration. By the end of that year, both agencies were a reality.
|
what exactly is haggis>
|
Ingredients. Haggis is a traditional Scottish sausage made from a sheep’s stomach stuffed with diced sheep’s liver, lungs and heart, oatmeal, onion, suet and seasoning. Most haggis is part-cooked before being sold and needs to be simmered in boiling water for one to two hours. You can also buy vegetarian haggis based on beans.
|
They may not even know what, exactly, it is. Haggis is a type of sausage, popular in several parts of the U.K., but mostly Scotland. Haggis traditionally contains sheep’s pluck (lungs, liver and heart), onions, oatmeal, spices and mutton fat, boiled in a sheep’s stomach. That’s the real thing, which you may not have in the States because the sale of lung was banned in this country in 1971.
|
Throw it in a Ziploc bag for goodness sake. Haggis is often served with neeps and tatties which would be rutabagas and potatoes to you and me. Interestingly enough it is also often served with a dram or rather Scottish whiskey.
|
A Haggis is a very old Scottish dish, which combines meats, spices and oatmeal to create a very rich, unusual, but none the less delicious feast. The factual and historic description of Haggis is sometimes off-putting to people who have not tried it.
|
They may not even know what, exactly, it is. Haggis is a type of sausage, popular in several parts of the U.K., but mostly Scotland. Haggis traditionally contains sheep’s pluck (lungs, liver and heart), onions, oatmeal, spices and mutton fat, boiled in a sheep’s stomach. That’s the real thing, which you may not have in the States because the sale of lung was banned in this country in 1971.
|
what exactly is haggis>
|
Haggis recipes. Haggis is a traditional Scottish sausage made from a sheep’s stomach stuffed with diced sheep’s liver, lungs and heart, oatmeal, onion, suet and seasoning. Most haggis is part-cooked before being sold and needs to be simmered in boiling water for one to two hours. You can also buy vegetarian haggis based on beans.
|
A Haggis is a very old Scottish dish, which combines meats, spices and oatmeal to create a very rich, unusual, but none the less delicious feast. The factual and historic description of Haggis is sometimes off-putting to people who have not tried it.
|
They may not even know what, exactly, it is. Haggis is a type of sausage, popular in several parts of the U.K., but mostly Scotland. Haggis traditionally contains sheep’s pluck (lungs, liver and heart), onions, oatmeal, spices and mutton fat, boiled in a sheep’s stomach. That’s the real thing, which you may not have in the States because the sale of lung was banned in this country in 1971.
|
A Haggis is a very old Scottish dish, which combines meats, spices and oatmeal to create a very rich, unusual, but none the less delicious feast. The factual and historic description of Haggis is sometimes off-putting to people who have not tried it.
|
Throw it in a Ziploc bag for goodness sake. Haggis is often served with neeps and tatties which would be rutabagas and potatoes to you and me. Interestingly enough it is also often served with a dram or rather Scottish whiskey.
|
how long does fluconazole stay in your system
|
Get help from a doctor now ›. Fluconazole: Peak plasma concentrations in fasted normal volunteers occur between 1 and 2 hours with a terminal plasma elimination half-life of approximately 30 hours (range: 20 to 50 hours) after oral administration. If you wait 5 half-lives it will all be gone. ...Read more.
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
I would always take Diflucan. It is a pill that your doctor gives you and you take it once and it lasts up to seven days in your system. That has worked the best for me. Also they told me to eat yogurt when taking other antibiotics. I would always get a bladder infection that would turn into a yeast infection.
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
how long does fluconazole stay in your system
|
Fluconazole: Peak plasma concentrations in fasted normal volunteers occur between 1 and 2 hours with a terminal plasma elimination half-life of approximately 30 hours (range: 20 to 50 hours) after oral administration. If you wait 5 half-lives it will all be gone. ...Read more.
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
Fluconazole is a very expensive drug. Taking fluconazole for a long period of time can lead to yeast infections (such as thrush, vaginitis, or severe candida infection of the throat, see Fact Sheet 501) that are resistant to fluconazole. These resistant infections can only be...
|
A group of organisms which lives together in an area is called a
|
Several populations of organisms living together in one area is called an ecosystem. Added: Actually, several populations of organisms living together in one area is called … a community. 3 people found this useful. Group of populations living in an area plus the e … nvironment around them is called ecosystem. + 23 others found this useful. Rochelle Navarrete. 1 Cheap Valentines Day Getaways Many romantic escapes can be expensive because they often focus on luxurious accommodations in high-end areas.
|
Print. a group of organisms of the same species that live in the same area is called a...
|
William Cyrus. 12.1k Karma. 1. A group of organisms of the identical species which live in the particular area is known as an ecosystem. A term ecosystem refers towards the combined physical as well as biological components of the environment. 1. A group of individual of the same spieces are called population. Population interact with the non-living world around them called ecosystem. A group of dolphins are called pod, bees-swarm, birds-flock and so on.
|
An ecosystem contains one or more communities of living organisms. A community is all the organisms living together in a certain area. Each community has species of animals, plants and other organisms that live together.All the organisms of one species in a community are called a population. To describe a community you need to know the kinds of populations that are present. You need to know the size of the population.
|
Group of one species living together is called population. Group of populations living in an area is called community. Group of populations living in an area plus the e … nvironment around them is called ecosystem. + 23 others found this useful. Rochelle Navarrete. 1 Cheap Valentines Day Getaways Many romantic escapes can be expensive because they often focus on luxurious accommodations in high-end areas.
|
example of famous renaissance literature
|
The earliest Renaissance literature appeared in Italy in the 14th century; Dante, Petrarch, Boccaccio, Machiavelli and Ariosto are notable examples of Italian Renaissance writers. From Italy the influence of the Renaissance spread at different times to other countries and continued to spread around Europe through the 17th century. The English Renaissance and the Renaissance in Scotland date from the late 15th century to the early
|
The literature of the Renaissance was written within the general movement of the Renaissance which arose in 14th century to the late 17th century.Italy and continued until the 16th century while being diffused into the western world. From Italy the influence of the Renaissance spread at different times to other countries and continued to spread around Europe through the 17th century. The English Renaissance and the Renaissance in Scotland date from the late 15th century to the early
|
This is a great example of Renaissance legacy around me because William Shakespeare was known for his literature and plays like Romeo and Juliet Literature has been very important over the years! One famous book that was written by Francis Petrarch, who was a fourteenth century writer. Four of today's biggest achievements! The Renaissance Legacy around Me Renaissance Art Literature Architecture Inventions Today one of the biggest Renaissance Art's is some of Shakespeare play's.
|
The creation of the printing press (using movable type) by Johannes Gutenberg in the 1450s encouraged authors to write in their local vernacular rather than in Greek or Latin classical languages, widening the reading audience and promoting the spread of Renaissance ideas. From Italy the influence of the Renaissance spread at different times to other countries and continued to spread around Europe through the 17th century. The English Renaissance and the Renaissance in Scotland date from the late 15th century to the early
|
In northern Europe the scholarly writings of Erasmus, the plays of Shakespeare, the poems of Edmund Spenser and the writings of Sir Philip Sidney may be considered Renaissance in character. From Italy the influence of the Renaissance spread at different times to other countries and continued to spread around Europe through the 17th century. The English Renaissance and the Renaissance in Scotland date from the late 15th century to the early
|
what is the origin of the name yemen
|
One etymology derives Yemen from yamin, meaning on the right side, as the south is on the right when facing the sunrise. Another derives Yemen from yumn, meaning felicity, as much of the country is fertile. The Romans called it Arabia Felix (Happy Arabia) as opposed to Arabia Deserta (Deserted Arabia). It is bordered by Saudi Arabia to the north, the Red Sea to the west, the Gulf of Aden and Arabian Sea to the south, and Oman to the east. Although Yemen's constitutionally stated capital is the city of Sana'a, the city has been under rebel control since February 2015.
|
Nicknames for Yemen: | Edit. Share what you know! Meanings and history of the name Yemen: | Edit. The name Yemen is not of certain origin but probably derives from the Arabic word meaning south, signifying its location on the Arabian Peninsula.
|
Southern Arabia, especially Yemen is often referred to as Arabia Felix, or the Happy Arabia. This name is a Latin translation from Periplus of the Erythraean Sea, a 1st century AD book by an anonymous Greek writer, who coined the original phrase “Eudaemon Arabia” when describing the port of Aden. There are different theories about the source of Yemen's Arabic name, Al Yaman. The early Muslims living around Mecca divided their lands into those lying northward, or shaman, and those lying to the south, or yamanan.
|
Yemen (/ˈjɛmən/ ; Arabic: اليَمَن al-Yaman), officially known as the Republic of Yemen (الجمهورية اليمنية al-Jumhūrīyah al-Yamanīyah), is an Arab country in Southwest Asia, occupying the southwestern to southern end of the Arabian Peninsula. It is bordered by Saudi Arabia to the north, the Red Sea to the west, the Gulf of Aden and Arabian Sea to the south, and Oman to the east. Although Yemen's constitutionally stated capital is the city of Sana'a, the city has been under rebel control since February 2015.
|
Yemen is a developing country. Under the rule of President Ali Abdullah Saleh, Yemen was described as a kleptocracy. According to the 2009 international corruption Perception Index by Transparency International, Yemen ranked 164 out of 182 countries surveyed. It is bordered by Saudi Arabia to the north, the Red Sea to the west, the Gulf of Aden and Arabian Sea to the south, and Oman to the east. Although Yemen's constitutionally stated capital is the city of Sana'a, the city has been under rebel control since February 2015.
|
how much to renovate a small kitchen
|
Costs, materials and best practices for the example Small Kitchen Remodeling project will help you answer these questions. Use this information to develop a budget, bid requirements, hiring contracts and a project plan. Actual returns vary widely and are affected by the range of home prices in your neighborhood, the overall condition of your home and sensible design choices. A good quality Small Kitchen Remodeling project in the right neighborhoods can return 61% - 72% of its initial cost.
|
When you're working with a $15,000 to $30,000 kitchen remodel budget, you can leave more work to the professionals instead of doing much of it yourself. This might include refinishing or refacing your countertops, painting the walls and ceilings, installing new lighting and rewiring some electrical work. For example, cabinets take up almost 30 percent of the kitchen remodel budget, but you can save by investing in stock kitchen cabinets rather than custom cabinets. Also, you can do some of the installation and replacement yourself. You can also break up the projects over time so you can save for one project at a time.
|
How much did your kitchen renovation cost, and where did you spend it? According to Today, the average cost for a kitchen remodel is $15,000 to $20,000 — without the appliances. Costs can be driven by location, size of the kitchen, and the quality of appliances. You can opt for less expensive IKEA cabinets, or have them built by hand to be completely custom to your kitchen. You can also do demolition and much of the installation yourself, or contract everything out. So, we're curiou
|
1 In contrast, DoItYourself.com estimates that the cost of a typical kitchen remodel can start around $5,000 with some do-it-yourself work included, and averages $15,000-$26,000. 1 The cost of remodeling a kitchen depends on the current layout, size and condition of the room, as well as the quality of replacement products chosen.
|
The cost of remodeling a kitchen can vary widely depending on the size and scope of your project, with the national average coming in around $17,000 and most homeowners spending between $12,000 and $19,000. This guide can help estimate your costs and give you a starting point for various upgrades and services. The average cost of having new countertops installed is $3,401, but it is important to realize how much this can vary from project to project. The price will be dependent on the size of your kitchen, the simplicity of the layout and the materials used.
|
how long does it take for meat to digest in the stomach
|
Meat may stay in the intestines for 24-72 hours and still depend on its type. Likewise, red meat in particular takes 1-3 days to complete the digestion process because of fat content and high protein, according to Lisa Cicciarello Andrews of University of Cincinnati.
|
Your body can digest most food in less time it takes hotshot celebrities to get engaged: about 4-12 hours. Fruits are the fastest travelers on the intestinal interstate, with meats driving like an oversized load in the right lane (they can take 2-3 days to be excreted or even longer as it rots inside your intestine).
|
Digestion time varies between individuals and between men and women. After you eat, it takes about six to eight hours for food to pass through your stomach and small intestine. Food then enters your large intestine (colon) for further digestion, absorption of water and, finally, elimination of undigested food.
|
To further elaborate the hours of digestion from small intestine where the real digestion happens, the size of small intestine is normally ranging from 18-21 feet long and may take 3-6 hours for the chemical elements from food pass all the way though the blood stream to absorb the nutrients.
|
However, the normal range of digestion will take 24 to 72 hours. Now, let us have insight on how it takes to digest from the moment we ingest food up to the last process of digestion.
|
average cost for anytime fitness
|
Anytime Fitness Membership Fees and Benefits. Anytime Fitness prices will depend on the kind of membership you apply for and where, although the cost is usually $30 to $36 with a $50 activation fee. However, in other clubs the membership fee is $44 for a single monthly membership and $39 for a 12 month membership.
|
We fit your busy schedule and on-the-go lifestyle. With your membership, you can work out when it’s best for you—day or night! Our clubs are open 24 hours a day, 7 days a week, 365 days a year. At Anytime Fitness you hold the key, literally. Access to our clubs is protected by our state-of-the-art security system and will only be granted with the proper key. Once inside, you have full use of cutting-edge strength training and cardio equipment.
|
1 Monthly fees average $35 to $40 for a single membership, but can be as low as $20 depending on age, location and whether customers are willing to sign an extended contract. 2 Many health clubs also charge an average enrollment fee of $40, but some can charge more than $100.
|
1 Monthly fees average $35 to $40 for a single membership, but can be as low as $20 depending on age, location and whether customers are willing to sign an extended contract. 2 Many health clubs also charge an average enrollment fee of $40, but some can charge more than $100.
|
We fit your busy schedule and on-the-go lifestyle. With your membership, you can work out when it’s best for you—day or night! Our clubs are open 24 hours a day, 7 days a week, 365 days a year. At Anytime Fitness you hold the key, literally. Access to our clubs is protected by our state-of-the-art security system and will only be granted with the proper key. Once inside, you have full use of cutting-edge strength training and cardio equipment.
|
how long is a football pitch in metres
|
The dimensions are specified in Law 1 of the official FIFA Laws of the Game. According to FIFA rules, the standard length of a football pitch should be between 90-120 meters (100-131 yards) while its width is from 45-90 meters (49-100 yards). Football fields used in international matches have similar measurement to the league pitches.
|
Find out the size details of a football pitch. Did you know that not all pitches are the same size? The length of a pitch must be between 100 yards (90m) and 130 yards (120m) and the width not less than 50 yards (45m) and not more than 100 yards (90m).
|
Best Answer: The largest size of a full football pitch is 90m wide by 120m long.
|
An American football field is 109.728 meters long (120 yards) by 48.768 meters wide (53 1/3 yards).
|
What is the length and width of a football pitch? 77 metres long 66 wide is acceptable, but this can vary widely, as FIFA rules indicate a variance between 100-130 yards long, and 50-100 yards wide.
|
where did shinola get its name
|
Shinola is an American luxury lifestyle brand which specializes in watches, bicycles, and leather goods among items. Founded in 2011, its name is a nod to the former Shinola shoe polish company that was manufactured in the early-and mid-20th century. In 2001, the name Shinola was acquired by Bedrock Manufacturing, a venture capital firm based in Dallas, Texas (later rechristened as Bedrock Brands). Kartsotis wanted to create an American watch-manufacturing brand to rival Swiss-makers at a lower price point.
|
The Shinola bikes are assembled in a workshop in the company's newly opened flagship Detroit retail store, which sells the bikes and the watches. Shinola has also just opened a retail location in the New York City neighborhood of Tribeca. The road to this Motor City start-up began with a simple idea: We wanted to manufacture in the United States, recalled Heath Carr, chief executive of Shinola, the maker of Detroit-built watches and bicycles. (Yep, the company derived its name from the World War II phrase, You don't know s--- from Shinola.). The new Shinola, which bought the rights to the name but doesn't have anything to do with the old shoe polish company, has been in business for about 2½ years. It currently has more than 100 employees—75 of whom are in Detroit, where the company's precision watches and bicycles are assembled
|
Before Washington, D.C., became America’s capital in 1800, the Congress met in a number of different locations, including Baltimore, Trenton and New York City.
|
Shinola watches range in price from $475 to $995. It also makes luxury bicycles, $1,950 to $2,950, and leather journals. The brand’s other products include “Shinola Cola” and, as a throwback, actual shoe polish. FORTUNE — Judith Walker used to have to drive more than an hour to get to her job at the General Motors plant in Lake Orion, Mich. Now, she commutes about five minutes to get to her job in Detroit. But she’s not making cars, she’s assembling the near-microscopic components of $700 watches.
|
An ambitious new manufacturing company is repurposing the Shinola brand (as in you don’t know s**t from … ) to tell a unique story of American craftsmanship. Having your brand name become part of the common lexicon is a marketing coup of the highest order. In the case of Shinola’s new watches, part of that story is construction in a fifth-floor factory above a Detroit design college.
|
did us landed on moon
|
They say Neil Armstrong and Buzz Aldrin landed on the Moon on July 20, 1969, and set foot on the surface 6 hours later.This same organization claims there were 5 additional missions which successfully landed on the Moon, and an alleged total of 12 people went for a walk there.
|
The Moon landing conspiracy theories claim that some or all elements of the Apollo program and the associated Moon landings were hoaxes staged by NASA with the aid of other organizations. 1 On the surface of the Earth, Apollo 11's fueled and crewed Lunar Module, Eagle, would have weighed approximately 17 short tons (15,300 kg). 2 On the surface of the Moon, however, after expending fuel and oxidizer on her descent from lunar orbit, the lander weighed about 2,698 pounds (1,224 kg).
|
The first human-made object to reach the surface of the Moon was the Soviet Union 's Luna 2 mission, on 13 September 1959. The United States' Apollo 11 was the first manned mission to land on the Moon, on 20 July 1969. The U.S. robotic Surveyor program was part of an effort to locate a safe site on the Moon for a human landing and test under lunar conditions the radar and landing systems required to make a true controlled touchdown. Five of Surveyor's seven missions made successful unmanned Moon landings.
|
As of August 2012, eight of the twelve Apollo astronauts who landed on the Moon between 1969 and 1972 still survive, including Buzz Aldrin. Also, nine of the twelve Apollo astronauts who flew to the Moon without landing between 1968 and 1972 still survive, including Michael Collins. 1 On the surface of the Earth, Apollo 11's fueled and crewed Lunar Module, Eagle, would have weighed approximately 17 short tons (15,300 kg). 2 On the surface of the Moon, however, after expending fuel and oxidizer on her descent from lunar orbit, the lander weighed about 2,698 pounds (1,224 kg).
|
The most notable claim is that the six manned landings (1969–72) were faked and that twelve Apollo astronauts did not actually walk on the Moon. Various groups and individuals have made such conspiracy claims since the mid-1970s. 1 On the surface of the Earth, Apollo 11's fueled and crewed Lunar Module, Eagle, would have weighed approximately 17 short tons (15,300 kg). 2 On the surface of the Moon, however, after expending fuel and oxidizer on her descent from lunar orbit, the lander weighed about 2,698 pounds (1,224 kg).
|
what is a buyer's agent
|
Buyer's Agent. The buyer's agent is the individual that represents buyers when they purchase a home. This agent negotiates with the seller's agent (the listing agent) to come to a final price agreed upon by the buyer and seller. The buyer's agent is paid once the deal goes through. In the real estate agent community, the buyer's agent is often referred to as the selling agent..
|
A buyers agent works for the buyer. The agents fiducary responsibility is with the buyer, not the other agent, not with the seller. A buyers agent tries to get the best deal for the buyer, protects the buyer with proper paperwork, disclosures, inspections and the closing process. The Listing agent or Sellers agent represents the interest of the seller. This can be confusing to a buyer and often a buyer will call a listing agent because they want to see a house, call the number on the sign or the listing ad online and they end up with the Seller's agent.
|
A buyers agent by definition works for the buyer. The buyers agent fiduciary responsibility is to the buyer. Which means the buyer is being represented in the transaction. Finding the property writing the offer and negotiating the sale and handing the keys to the buyer when the transaction is complete. The Listing agent or Sellers agent represents the interest of the seller. This can be confusing to a buyer and often a buyer will call a listing agent because they want to see a house, call the number on the sign or the listing ad online and they end up with the Seller's agent.
|
Home buyers should always have their own agent. Buyer agents work to negotiate the best terms and price for the buyer. Best of all, the buyer agent’s services are free to the buyer. Most people think they have to pay a sales commission. The truth is this: only the seller pays the commission. Whether a buyer uses an agent or not, the seller still pays the commission.
|
If an agent is not a buyer's agent, they represent the seller and work in the best interest of the seller (broker's agent and seller's agent). As a buyer's agent, the client is the buyer where the agent works in the best interest of the buyer. A contract is signed stating the condition and terms of this relationship. This agent has the ability to pull comparatives and guide you as to the right price to offer for a home, verify tax information, etc. The Listing agent or Sellers agent represents the interest of the seller. This can be confusing to a buyer and often a buyer will call a listing agent because they want to see a house, call the number on the sign or the listing ad online and they end up with the Seller's agent.
|
what are packaging clamshells
|
Our equipment is designed for large parts, and has the capacity to produce large orders very cost effectively. Call Pat at 800-914-8994 for more information about our free design services and the custom thermoformed plastic clamshell packaging manufactured by Great River Plastics, LLC. We do NOT offer stock products. Clamshell Packaging. Clamshell packaging manufactured by Great River Plastics, LLC, is custom thermoformed for specific retail products. Plastic clamshell packages display products for optimum display value, anti-pilferage, and best use of shelf space.
|
Plastic Clamshell Packaging. Custom plastic clamshell packaging from Dordan Manufacturing is the ideal packaging medium for protecting and selling your product at retail.
|
Custom Thermoformed Packaging. At National Plastics, we do more than just sell clamshell packaging, we sell packaging solutions. Our design team will work with you to create a package that not only functions well, but adds to the aesthetic appeal of your product.
|
Our clamshells and clamshell packaging solutions offer many advantages for showcasing products. We have a wide array of model types to choose from, including various boxes, containers, and trays, many of which come standard with tamper evident and theft deterrent features. They are box-shaped containers with a hinged lid and closures, which can be made re-closable or permanently sealed with theft deterrence. An insert card displays product information and graphics. SouthPack can configure custom clamshell packaging in many ways, enabling the package to hang or stand upright.
|
clamshell packaging. Follow clamshell packaging to get e-mail alerts and updates on your eBay Feed. Unfollow clamshell packaging to stop getting updates on your eBay Feed. Yay! You're now following clamshell packaging in your eBay Feed.
|
what is maximum solar flare
|
Solar maximum or solar max is a normal period of greatest solar activity in the 11 year solar cycle of the Sun. During solar maximum, large numbers of sunspots appear and the sun's irradiance output grows by about 0.07%. The smoothed sunspot number has already reached 67 (in February 2012) due to the strong peak in late 2011 so the official maximum will be at least this high. The smoothed sunspot number has been flat over the last four months.
|
Like flares, CMEs are more frequent during the active phase of the Sun's approximately 11 year cycle. The last maximum in solar activity was in the year 2000. The next maximum is expected to occur in 2013. Coronal mass ejections are more likely to have a significant effect on our activities than flares because they carry more material into a larger volume of interplanetary space, increasing the likelihood that they will interact with the Earth.
|
A solar flare occurs when magnetic energy that has built up in the solar atmosphere is suddenly released. Radiation is emitted across virtually the entire electromagnetic spectrum, from radio waves at the long wavelength end, through optical emission to x-rays and gamma rays at the short wavelength end. On the other hand, it is less than one-tenth of the total energy emitted by the Sun every second. There are typically three stages to a solar flare. First is the precursor stage, where the release of magnetic energy is triggered. Soft x-ray emission is detected in this stage.
|
Solar flares occur in active regions. The frequency of flares coincides with the Sun's eleven year cycle. When the solar cycle is at a minimum, active regions are small and rare and few solar flares are detected. These increase in number as the Sun approaches the maximum part of its cycle. The Sun will reach its next maximum in the year 2011, give or take one year. On the other hand, it is less than one-tenth of the total energy emitted by the Sun every second. There are typically three stages to a solar flare. First is the precursor stage, where the release of magnetic energy is triggered. Soft x-ray emission is detected in this stage.
|
[image-36]. The sun goes through a natural solar cycle approximately every 11 years. The cycle is marked by the increase and decrease of sunspots -- visible as dark blemishes on the sun's surface, or photosphere. The greatest number of sunspots in any given solar cycle is designated as solar maximum.. The lowest number is solar minimum.. The solar cycle provides more than just increased sunspots, however. In the sun's atmosphere, or corona, bright active regions appear, which are rooted in the lower sunspots. Scientists track the active regions since they are often the origin of eruptions on the sun such as solar flares or coronal mass ejections.
|
what gpa do you need to get your md degree
|
Originally Posted by SurfDoctor I've been musing on the idea that the GPA you earn while attaining a doctorate degree is not all that important anymore. I busted my hump earning a high GPA on my masters, but I'm not sure that it is all that relevant once you reach your terminal degree. Of course there is a minimum GPA to be able to stay in a program and I think that's usually a 3.0, what I'm wondering is whether there is any benefit to having a GPA that is higher. Some programs have a minimum GPA in coursework to qualify for comprehensives. Your dissertation is what people will review and question. Originally Posted by SurfDoctor. I've been musing on the idea that the GPA you earn while attaining a doctorate degree is not all that important anymore.
|
For the class admitted in 2014, the average MCAT score was 34 and the average GPA was 3.7. Emory receives over 8000 applications each year for its incoming class of 138 students, so you’ll need to be competitive in order to be invited for an interview. You will also need to complete six semester hours of English (a full year of college-level grammar and composition). If you feel that your coursework in other areas would fulfill this requirement, you will be given an opportunity in the Emory Supplemental Application to explain.
|
First, you need to get your GPA up – a year of good grades in upper-level science courses might be enough to get you up to a 3.0. At that point, you can apply to an SMP with strong links to a medical school. This will take you a minimum two years, which might not seem appealing at this point.
|
The easiest way to calculate your GPA is to use Wolverine Track. You can use the Wolverine Track GPA Calculator to determine your semester GPA, cumulative GPA including current semester grades, and what grades you need to reach a certain GPA. Logging into Wolverine Track: To log into Wolverine Track, first log into UVLink. Click on the Student Tab.
|
If you are concerned and applying with a low GPA, it could be worth your while to consider the following two options: 1. Time off: The average age of entering medical students is now 24, with a considerable number of students applying later. Not only do medical schools appreciate mature applicants who learned from their mistakes, but if you take time off you will have more time to prepare a more competitive application.
|
who did odysseus see in the underworld
|
The souls that Odysseus saw in the Underworld On seeing Achilles' soul, said Odysseus: … Achilles, the most fortunate man that ever was or will be … honoured as though you were a god … and now you are a mighty prince among the dead. For you … Death should have lost its sting.. (Odysseus to Achilles.
|
In order to complete his quest home, Odysseus explains that he must enter the underworld (at the advice of Circe) to speak to the wise man Tisereas. Here he meets the spirits of the dead, notably his mother, Agamemnon, Achilles, and Ajax.
|
Odysseus sees a bunch of random souls as soon as he prepares the offering(to get Tiresias to come up in the underworld to visit him and tell him his future) Odysseus sees his … mom, Anticeleia, he sees as well Achilles, Ajax, Agamemnon, and of course Tiresias. + 9 others found this useful. Dina Chester. Jkm Young.
|
V.283-290 Poseidon refrained from drowning the hero, but he threw Odysseus and his crew off course. Waylaid on the island of Circe (the enchantress who initially turned his men into swine), Odysseus spent a luxurious year enjoying the bounty of the goddess.
|
Confidence votes 36.2K. Odysseus sees a bunch of random souls as soon as he prepares the offering(to get Tiresias to come up in the underworld to visit him and tell him his future) Odysseus sees his mom, Anticeleia, he sees as well Achilles, Ajax, Agamemnon, and of course Tiresias.
|
who did odysseus see in the underworld
|
Odysseus talked to his mother Anticlea, who died of grief when he did not return home after the Trojan War. Odysseus was also surprised to see Elphenor, the youngest member of his crew, in the Underworld. Elphenor was sitting on the roof of Circe's house, when he had fallen asleep and fell to his death.
|
In order to complete his quest home, Odysseus explains that he must enter the underworld (at the advice of Circe) to speak to the wise man Tisereas. Here he meets the spirits of the dead, notably his mother, Agamemnon, Achilles, and Ajax.
|
Confidence votes 36.2K. Odysseus sees a bunch of random souls as soon as he prepares the offering(to get Tiresias to come up in the underworld to visit him and tell him his future) Odysseus sees his mom, Anticeleia, he sees as well Achilles, Ajax, Agamemnon, and of course Tiresias.
|
V.283-290 Poseidon refrained from drowning the hero, but he threw Odysseus and his crew off course. Waylaid on the island of Circe (the enchantress who initially turned his men into swine), Odysseus spent a luxurious year enjoying the bounty of the goddess.
|
Odysseus sees a bunch of random souls as soon as he prepares the offering(to get Tiresias to come up in the underworld to visit him and tell him his future) Odysseus sees his … mom, Anticeleia, he sees as well Achilles, Ajax, Agamemnon, and of course Tiresias. + 9 others found this useful. Dina Chester. Jkm Young.
|
hyperphagia definition
|
In medicine, polyphagia (sometimes known as hyperphagia) is a medical sign meaning excessive hunger and abnormally large intake of solids by mouth. Causes of increased appetite include: 1 Anxiety. 2 Depression. 3 Certain drugs. 4 Diabetes mellitus. 5 Hyperthyroidism. 6 Hypoglycemia.
|
1 Preparation for migration and for winter requires a period of hyperphagia and a laying down of fat reserves. 2 Although hyperphagia is well documented during and prior to migration, it is not known whether it persists until birds reach their breeding grounds. 1 Although hyperphagia is well documented during and prior to migration, it is not known whether it persists until birds reach their breeding grounds. 2 Children with Prader-Willi syndrome show extreme hyperphagia and obsessive-compulsive behavior.
|
hyperphagia (hī´pərfā´jēə) , n a disorder marked by an abnormal appetite and excessive ingestion of food, even to the point of gastric pain and vomiting. It is associated with the malfunction of the hypothalamus and is often linked to conditions such as Kleine-Levin syndrome and central nervous disorders.
|
Definition of HYPERPHAGIA. : abnormally increased appetite for consumption of food frequently associated with injury to the hypothalamus. — hy·per·phag·ic \-ˈfa-jik\ adjective. ADVERTISEMENT. Medical Definition of HYPERPHAGIA. : abnormally increased appetite for food frequently associated with injury to the hypothalamus—compare polyphagia. — hy·per·phag·ic \-ˈfaj-ik\ adjective.
|
In biology, polyphagia is a type of phagy, referring to an animal that feeds on many kinds of food. Polyphagia or hyperphagia is excessive hunger or increased appetite. It derives from the Greek words πολύς (polys) which means very much or many, and φαγῶ (phago) meaning eating or devouring. Causes of increased appetite include: 1 Anxiety. 2 Depression. 3 Certain drugs. 4 Diabetes mellitus. 5 Hyperthyroidism. 6 Hypoglycemia.
|
what is the kaieteur falls known for
|
Kaieteur Falls is the world's widest single drop waterfall, located on the Potaro River in the Kaieteur National Park, in Essequibo, Guyana. Its location is in the Amazon forest. Kaieteur Falls is about four times higher than the Niagara Falls, on the border between Canada and the United States, and about twice the height of the Victoria Falls, on the border of Zambia and Zimbabwe in Africa. It is a single drop waterfall
|
Kaieteur Falls is a major tourist attraction in Guyana. The falls is located in Kaieteur National Park and is in the center of Guyana's rainforest. There are frequent flights between the falls airstrip and Ogle Airport and Cheddi Jagan International Airport in Georgetown. Kaieteur Falls is about four times higher than the Niagara Falls, on the border between Canada and the United States, and about twice the height of the Victoria Falls, on the border of Zambia and Zimbabwe in Africa. It is a single drop waterfall
|
Luckily, there is the Kaieteur Falls that stands out among the rest of the falls in the whole wide world. The Kaieteur Falls is located in Guyana, a tropical country on the continent of South America. It is estimated to be as five times high as the Niagara Falls, which is considered the highest falls in the continent of North America. Since Kaieteur Falls is one of the most sought-after tourist spot not only in Guyana but in South America as well, the transportation means to go to the area are made easier for the tourists. The falls are situated in Kaieteur National Park. It can be found in the central part of Guyana’s tropical rainforest.
|
Guyana submitted the Kaieteur National Park, including the Kaieteur Falls, to UNESCO as its first World Heritage Site nomination. The proposed area and surrounds have some of Guyana's most diversified life zones with one of the highest levels of endemic species found in South America.
|
Kaieteur Falls of the Central Guyana-Image by Barefoot Traveler. 1- Kaieteur Falls is a waterfall on the Potaro River in central Guyana. It is located in the Kaieteur National Park. 3- Kaieteur Falls is about three times higher than the more well known Niagara Falls, located on the border between Canada Falls and the US and about two times the height of the Victoria Falls located on the border of Zambia and Zimbabwe in Africa. Amazing falls of the Kaieteur national park – Image by Tim Snell.
|
where can i buy a scale like doctor's have
|
Determine if you would like to buy a balance beam scale or a bathroom scale. Balance beam scales, also known as physician's scales or doctor's scales, are upright and take up more room than a bathroom scale, although they tend to be more accurate. You can purchase a bathroom scale almost anywhere, but getting a scale that is accurate is key. Some scales provide fancy features like a body mass index calculator. Whether you want a souped-up scale, or a no-frills option, purchasing a scale that is accurate is the most important feature.
|
The Detecto 339 Eye Level Physician's Scale. This beam balance has a 400 lb / 175 kg capacity with 4 oz / 100 g resolution and height rod for getting weight and height together. This scale also has a durable construction and easy to clean design. The Detecto 349 Eye Level Physician's Scale. This beam balance has a 400 lb/175 kg capacity with 4 oz/100 g resolution and height rod. Durable construction and sturdy handpost make this scale great for hospitals, nursing homes and health centers.
|
Best Answer: I have a digital scale at my house and I check weight everyday, but in the Dr's office I weigh 8.5 lbs. I was a nurse for a number of years and can tell you that the one at the Dr's office comes closest to being correct. My son and daughter in law have a digital scale and they are both Doctors but theirs weighs heavier than mine.
|
Detecto's industry-leading physician scales are used every day in the medical profession by doctors and nurses around the world. Doctor scales measure factors like weight, height, and Body Mass Index (BMI). Each scale is USA-manufactured and built from sturdy materials that will provide years of accurate weighing. Detecto's EMR scales and physician scales are available in waist-high and eye-level models with digital LCD displays or mechanical weigh beam options for convenient, reliable readings.
|
Hospitals and clinics from across the USA have commented on the fine selection of medical scales we have. We have balance beam scales for doctor's offices with great features like height rods, hand posts and wheels. We also have digital physician scales that can measure BMI and more. The Detecto 349 Eye Level Physician's Scale. This beam balance has a 400 lb/175 kg capacity with 4 oz/100 g resolution and height rod. Durable construction and sturdy handpost make this scale great for hospitals, nursing homes and health centers.
|
balbiani body definition
|
The Balbiani body is an evolutionarily conserved asymmetric aggregate of organelles that is present in early oocytes of all animals examined, including humans. Although first identified more than 150 years ago, genes acting in the assembly of the Balbiani body have not been identified in a vertebrate. To investigate if bucky ball functions in the establishment of the earliest known polarized structure in zebrafish and Xenopus, the Balbiani body or mitochondrial cloud, we determined if the Balbiani body was affected in bucky ball mutants.
|
The Balbiani body is an aggregate of mitochondria, ER, germinal granules and transcripts, which forms adjacent to the germinal vesicle (GV, the oocyte nucleus) in stage I oocytes. It moves vegetally and dissociates, leaving the germinal granules and vegetally-destined transcripts localized to the vegetal pole. To investigate if bucky ball functions in the establishment of the earliest known polarized structure in zebrafish and Xenopus, the Balbiani body or mitochondrial cloud, we determined if the Balbiani body was affected in bucky ball mutants.
|
bucky ball is the first gene in a vertebrate known to function in Balbiani body formation. In Xenopus and zebrafish, vegetal pole destined transcripts co-localize with the Balbiani body, leading to the hypothesis that it functions early in a vegetal pole localization pathway (Kloc et al., 2004b; Kosaka et al., 2007). To investigate if bucky ball functions in the establishment of the earliest known polarized structure in zebrafish and Xenopus, the Balbiani body or mitochondrial cloud, we determined if the Balbiani body was affected in bucky ball mutants.
|
Oocyte Polarity and the Embryonic Axes: The Balbiani Body, an Ancient Oocyte Asymmetry. The divisions of the germline stem cell are asymmetric in that they generate a renewing cell and a cell with the capacity to differentiate as an oocyte. Regulators of Balbiani body dynamics in zebrafish oocytes. (A) Formation of the Balbiani body adjacent to the nucleus requires the novel protein Bucky ball, while Magellan/MacF1 (an actin-microtubule crosslinking protein) contributes to dispersal of the (more...).
|
1. Define the role(s) of ooplasmic Balbiani bodies in body plan patterning and cell fate determination during embryogenesis. 2. Investigate the functions of ooplasmic ecdysone during insect embryogenesis. 3. Determine the biological significance of nonrandom distributions of yolk proteins within insect oocytes. Understanding how a complex organism develops from a single fertilized egg is critical for improved agricultural and medical practices. Crucial information for accomplishing this is assembled in the cytoplasm of the egg before fertilization.
|
sedimentary rocks kid definition
|
Sedimentary rock is rock that is made up of minerals, sand, mud, and even the remains of living things. It is often softer than other types of rock. Fun Earth Science Facts for Kids All about Sedimentary Rocks – Sedimentary Rocks with Fossils image.
|
Save. sedimentary /ˌsɛdəˈmɛntəri/ adjective. sedimentary. /ˌsɛdəˈmɛntəri/. adjective. Learner's definition of SEDIMENTARY. technical. : made from material that sinks to the bottom of a liquid: made from sediment. sedimentary layers/deposits. Sandstone is a sedimentary rock. [=a type of rock formed when sediments that were deposited in ancient times were pressed together and became hard]. [+] more examples [-] hide examples [+] Example sentences [-] Hide examples.
|
Sandstone forms the metamorphic rock quartzite. Mudstone forms the metamorphic rock slate. Chalk is a soft, white form of limestone. Flint is a hard, sedimentary form of the mineral quartz. Learn about igneous rocks, metamorphic rocks, other rocks and minerals or fossils. Make a fossil cast or check out our rock sorting lesson plan.
|
Sedimentary rock is one of three types of rock found on Earth. The others are called igneous and metamorphic. Igneous and metamorphic rocks are the most common rock types in Earth's crust. Sedimentary rock is the most common rock type found at its surface.
|
Weathering is the process of breaking down rocks and minerals into smaller pieces by water, wind, and ice. Sedimentary rocks are formed from the breaking apart of other rocks (igneous, metamorphic, or sedimentary rocks) and the cementation, compaction and recrystallization of these broken pieces of rock. Sedimentary rocks are formed in three ways from these different sized sediments. A sedimentary rock is a layered rock that is formed from the compaction, cementation, and the recrystallization of sediments. Compaction is the squeezing together of layers of sediment due to the great weight of overlying layers of rock.
|
when does mercury go retrograde in april
|
Mercury goes retrograde three times a year for about three weeks at a time. The next time is coming up soon — Sept. 19 through Oct. 9. The dates for Mercury retrograde for the next few years are: 2016: Jan. 5 - Jan. 25, April 28 - May 22, Aug. 30 - Sept. 22, Dec. 19, 2016 - Jan. 8, 2017.
|
Mercury will be in retrograde for about 3 weeks. The sun is now in Taurus, moving into Gemini on May 22. Linda Goodman has written books that will help you to answer your questions.
|
About 19% of the movement of Mercury is retrograde. This implies that about 1/5 of people have retrograde Mercury in their radix. In 2016, Mercury retrogrades four times, all in the earth signs of Capricorn, Taurus and Virgo and then Capricorn again. This year's Mercury retrograde points to the end of a nine-year cycle that started in 2008.
|
Sometimes the other planets appear to be traveling backward through the zodiac; this is an illusion. We call this illusion retrograde motion. Three times a year, it appears as if Mercury is going backwards for about three weeks. This time was traditionally associated with confusions, delay, and frustration.
|
Aries. How Mercury retrograde will affect you for the April May 2010 retrograde period: Anything to do with finances, possession or property is affected during this period. You can expect delays, and mix-ups, some small and some grand.
|
purest form of honey
|
Today, very little honey is produced as comb honey. Comb honey is raw pure honey sections taken straight from the hive – honey bees' wax comb with no further handling at all. It is the most unprocessed form in which honey comes -- the bees fill the hexagon shaped wax cells of the comb with honey and cap it with beeswax. You can eat comb honey just like a chewy candy.
|
About. At America’s Heartland Honey we are committed to bringing you the purest form of honey possible. Our honey comes straight from the hive in Wisconsin. Once our bees are finished producing the honey, we collect the honey, strain it and bottle it. Ensuring you receive 100% all natural, raw honey.
|
Honey Comb is as close to the hive as you can get. This is pure, raw, unprocessed honey. The comb is cut directly from the hive and packaged, no processing is done. Each honey comb contains raw gallberry honey, a very sweet and flavorful honey. Honey comb can be paired with a variety of cheeses and fruits.
|
At America’s Heartland Honey we are committed to bringing you the purest form of honey possible. Our honey comes straight from the hive in Wisconsin. Once our bees are finished producing the honey, we collect the honey, strain it and bottle it. Ensuring you receive 100% all natural, raw honey.
|
At America’s Heartland Honey we are committed to bringing you the purest form of honey possible. Our honey comes straight from the hive in Wisconsin. Once our bees are finished producing the honey, we collect the honey, strain it and bottle it. Ensuring you receive 100% all natural, raw honey.
|
cost of beagle puppy
|
If you see a Beagle puppy priced at $250, this is a red flag. Alternatively, a $2500 Beagle is exceptionally expensive. While you must take all factors of locations, registration and age into consideration, the normal price range for a Beagle is $500 to $1200 in the U.S. Ongoing Care. We urge anyone considering the purchase of a Beagle to also consider the ongoing cost of care.
|
There is that notion that a Beagle puppy (or any other breed for that matter) “must be” 2 months old when purchased. Therefore, an unsold pup that is 9, 10, or even 11 weeks old will most likely be sold for much less money than his younger counterpart.
|
1 On average, a pocket beagle can cost anywhere from $250 to as much as $1,200. 2 A show-quality beagle that is in good health will tend to be near the higher price region, while your lower priced dogs are often found in dog pounds.
|
The cost of any given breed of puppy will depend on the breeder, the dog's parentage, and typical costs for that breed. Some online sites show some sellers offering Boerboel puppies for roughly $1200-$1400 USD.
|
It depends on your area, and the breeders in your area. In the suburbs of Chicago they can go up to $900, but I think that is a ridiculous price. Beagles are pretty common, you could go to Petfinder.com and find one that you could adopt from a shelter for a much lower cost like $800 or $500.
|
what is granular material
|
Granular Materials. A granular material is a collection of distinct macroscopic particles, such as sand in an hourglass or peanuts in a container. The evolution of the particles follows Newton's equations, with repulsive forces between particles that are non-zero only when there is a contact between particles. Constitutive laws for granular flows. A constitutive relation is an equation that relates the stress in a material to other known variables. The common constitutive relation in fluid dynamics sets the stress proportional to the strain rate.
|
Examples of granular materials. A granular material is a conglomeration of discrete solid, macroscopic particles characterized by a loss of energy whenever the particles interact (the most common example would be friction when grains collide). In some sense, granular materials do not constitute a single phase of matter but have characteristics reminiscent of solids, liquids, or gases depending on the average energy per grain. However in each of these states granular materials also exhibit properties which are unique.
|
Granularity is the extent to which a material or system is composed of distinguishable pieces or grains. It can either refer to the extent to which a larger entity is subdivided, or the extent to which groups of smaller indistinguishable entities have joined together to become larger distinguishable entities. The terms fine and coarse are used consistently across fields, but the term granularity itself is not. For example, in investing, more granularity refers to more positions of smaller size, while photographic film that is more granular has fewer and larger chemical grains..
|
According to material scientist Patrick Richard, Granular materials are ubiquitous in nature and are the second-most manipulated material in industry (the first one is water). In some sense, granular materials do not constitute a single phase of matter but have characteristics reminiscent of solids, liquids, or gases depending on the average energy per grain. However in each of these states granular materials also exhibit properties which are unique.
|
Much mechanical energy is lost to heat as the particles move (think of what happens to your kinetic energy when you jump on a beanbag chair). Granular materials form what are called “collective” systems, because the particles’ touching and rubbing together is so important in determining what happens. In a sandpile, for instance, each particle touches only a few others, but these “short range” interactions determine what happens to the whole pile. Many basic products, including a variety of building materials, chemicals, pharmaceuticals and food, are granular. Because of the properties of granular materials, many processing plants operate inefficiently and sometimes experience catastrophic failures, such as the collapsing grain container shown in the photo.
|
streptococcus anginosus causes what disease
|
Streptococcus anginosus is part of the human bacteria flora, but can cause diseases including brain and liver abscesses under certain circumstances. The habitat of S. anginosus is a wide variety of sites inside the human body. The majority of Streptococcus anginosus strains produce acetoin from glucose, ferment lactose, trehalose, salicin, and sucrose, and hydrolyze esculin and arginine. Carbon dioxide can stimulate growth or is even required for growth in certain strains.
|
Together with Streptococcus constellatus and Streptococcus intermedius they constitute the anginosus group, which is sometimes also referred to as the milleri group after the previously assumed single but later refuted species Streptococcus milleri. The majority of Streptococcus anginosus strains produce acetoin from glucose, ferment lactose, trehalose, salicin, and sucrose, and hydrolyze esculin and arginine. Carbon dioxide can stimulate growth or is even required for growth in certain strains.
|
MICROBIOLOGY. Members of the S. anginosus group are gram-positive, catalase-negative cocci (like other members of the genus Streptococcus). They are non-motile, facultative anaerobes that demonstrate variable hemolysis patterns (alpha, beta, or gamma) on sheep blood agar [ 17 ]. He named these organisms Streptococcus milleri in honor of the microbiologist W. D. Miller [ 1,7 ]. The organisms were subsequently recognized as normal flora of the human oral cavity and gastrointestinal tract with the ability to cause abscesses and systemic infections [ 8-12 ].
|
A: Group A Streptococcus is a bacterium that can cause a wide range of infections. People may also carry group A streptococci in the throat or on the skin and have no symptoms of illness. Most GAS infections are relatively mild illnesses such as strep throat, or impetigo (a skin infection).
|
Lancefield groups C and G comprise a variety of species; one of those species, Streptococcus dysgalactiae subsp. equisimilis (SDSE), frequently causes human infections. This species can cause the whole spectrum of infections caused by S. pyogenes (4, 5). Suggested citation for this article: Reissmann Reißmann, S Friedrichs, C Rajkumari, R Itzek, A Fulde, M RODLOFF, ac et. Al contribution Of streptococcus anginosus to infections caused by Groups c And g, streptococci Southern. india
|
what weight do you need a booster seat
|
Stephanie Tombrello. child passenger safety specialist. You can safely switch your child to a booster seat if she's at least 4 years old and she weighs 40 pounds or more or has grown too tall for her car seat (when her shoulders are higher than the top set of harness-strap slots in the car seat's back). In a crash, belt-positioning seats are far safer. (If you have only lap belts in the rear of your car, select a booster seat with an extra energy absorber belt.) Backless booster seats tend to provide a better fit than the high-back kind, and are more portable when you're switching them from car to car.
|
Buckling children in age-and size-appropriate car seats, booster seats, and seat belts reduces the risk of serious and fatal injuries: 1 2. 2 Booster seat use reduces the risk for serious injury by 45% for children aged 4–8 years when compared with seat belt use alone. Age 5 up until seat belts fit properly: Booster seat. Once children outgrow their forward-facing seat, (by reaching the upper height or weight limit of their seat), they should be buckled in a belt positioning booster seat until seat belts fit properly.
|
Six seats had the more reasonable minimum weight limit of 40 pounds. This makes sense because the growth of children between 30 and 40 pounds occurs at a slower rate than when they are infants. An average 40-pound child is typically closer to age five, a much safer age to consider making a transition to booster use.
|
A backless booster. A booster seat is used to lift up a child and properly position the vehicle's lap/shoulder belts on children who are too small to fit the adult seat belt. Boosters are rated for use from 30-40 lbs to 80-100 lbs. Booster seats do not have a harness.
|
restraint until they are at least 5 years old and weigh more than 40 pounds. • Children older than 5 and more than 40 pounds must ride in a booster seat. until the child is 8 years old or is taller than 4 feet 9 inches. • Anyone over the age of 8 must be protected by a safety belt. • A booster seat helps your child fit correctly in your vehicle’s safety belt. It positions the lap belt on the hips and the shoulder belt across the chest, providing the greatest amount of protection. • Motor vehicle crashes are the #1 killer of children between the ages of 4-8.
|
what does the name symone mean
|
Symone /sy-mone/ [2 sylls.] as a girls' name is of Hebrew origin, and the name Symone means hear, listen. Symone is a variant transcription of Simone (Hebrew): feminine of Simon. Compare surname Samon.
|
[ syll. sy-mo-ne, sym-one ] The baby girl name Symone is pronounced as S IH M OW N- †. Symone is used chiefly in English and its origin is Hebrew. Symone is a spelling variant of the name Simone (English, French, and German). Symone is an unusual baby girl name. Its usage peaked in 1991 with 0.013% of baby girls being named Symone. It had a ranking of #761 then. The baby name has fallen from favor since then, and is today of very modest use.
|
Symone is generally used as a girl's name. It consists of 6 letters and 2 syllables and is pronounced Sy-mone. In the U.S. in 2014, it ranked 2422 in baby name popularity for girls with 75 occurrences.
|
The name Simone is a Greek baby name. In Greek the meaning of the name Simone is: Snub-nosed. Hebrew Meaning: The name Simone is a Hebrew baby name. In Hebrew the meaning of the name Simone is: Loud.
|
Symone is an unusual given name for women. Symone is an equally unusual surname for all people. (2000 U.S. Census). Displayed below is the baby name popularity of Symone for girls.
|
insurance junior underwriter salary
|
Average Junior Underwriter Salaries. The average salary for junior underwriter jobs is $48,000. Average junior underwriter salaries can vary greatly due to company, location, industry, experience and benefits. This salary was calculated using the average salary for all jobs with the term junior underwriter anywhere in the job listing. This free salary calculator uses salary data from millions of job listings indexed by Simply Hired's job search engine. The junior underwriter salary comparisons feature allows job seekers to get the information required to make important career decisions and negotiate salary ranges.
|
$31,000. Average Underwriter salaries for job postings in New York, NY are 36% higher than average Underwriter salaries for job postings nationwide.
|
(South Africa). The average salary for an Underwriter is R181,231 per year. Experience has a moderate effect on pay for this job. Most people move on to other jobs if they have more than 20 years' experience in this career. The skills that increase pay for this job the most are Risk Management / Risk Control and Underwriting. R100,160 - R305,882
|
Income. As a trainee or junior/assistant underwriter you could expect to earn £15,000 to £30,000 a year. As an experienced underwriter, you could earn between £30,000 and £65,000 a year. If you work in a specialist underwriter or underwriting manager role you could earn between £70,000 and £100,000 a year. Working hours and conditions. In a full-time job as an insurance underwriter, you would work standard office hours, Monday to Friday. You may occasionally need to work evenings and weekends during busy periods. Part-time hours and job share opportunities are sometimes available.
|
Insurance Underwriter Salary and Wages. According to the Bureau of Labor Statistics, the mean annual salary for underwriters was $63,330 in May of 2009. The highest paid underwriters made up the top ten percent and they earned approximately $99,420 per year. The bottom ten percent made just $35,630 per year. Those who worked with actual insurance carriers earned the most, at a mean wage of approximately $64,440 per year
|
cost of adding a bedroom and bath to a house
|
How much will you spend? The cost of an addition varies widely depending on the type of room and where you live. But just to give you a sense of how much it might cost, CostHelper.com estimates that adding a bathroom or bedroom could run from $25,000 to $50,000. A bedroom could easily cost just as much. A large room, such as a family room, could run as high as $100,000.
|
Suite Addition. Building out to add a bedroom allows you maximum flexibility. Adding a 14-by-16-foot master suite, including bathroom, over a crawlspace costs an average of $103,844 as of 2014, according to Remodeling. Costs can vary significantly by region, as the same master suite addition costs an average of $137,840 in a high-cost urban market. Choose upscale finishes and a bit more space and your new bedroom costs could skyrocket, with an average price of $224,989 for an upscale master suite addition as of 2014.
|
1 Contractor costs for a more extensive project (such as 500 square feet of new floor space with two bedrooms and a bathroom) can run $50-$250 or more a square foot, or $25,000-$125,000, and costs can go as high as $300-$500 a square foot for complex and luxurious projects. 1 If you're adding weight to your foundation, you may need a report from a structural engineer at a cost of $300-$800 or more, to see if your existing foundation needs to be reinforced or repaired. 2 You'll probably need a set of plans for your bedroom addition. 3 Your builder might be able to supply them.
|
After careful review of your adding a bedroom to a house project where you Hire a contractor, do None of the work yourself and use Average cost materials, we estimate the cost will be between $10,500 and $12,100. We also estimate the payback (the amount your home will appreciate by doing the remodel) will be $800.
|
1 Adding new floor space for a simple bedroom and closet with a foundation (but no bathroom) costs about $25-$50 a square foot if you do all or most of the work yourself (requires high-level skills), and anywhere from $50-$150 or more a square foot to hire a builder, depending on complexity and local labor rates. 1 If you're adding weight to your foundation, you may need a report from a structural engineer at a cost of $300-$800 or more, to see if your existing foundation needs to be reinforced or repaired. 2 You'll probably need a set of plans for your bedroom addition. 3 Your builder might be able to supply them.
|
cost of elderly prisoners
|
Elderly more expensive. A 2012 ACLU study estimated that it costs nearly $70,000 a year to house a prisoner over 50, compared with an average of $34,135 for a younger inmate. The increase is primarily driven by much higher health care costs for the older population. Health care costs for older inmates skyrocket. The growing number of older prisoners represents a potential fiscal time bomb. Elderly prisoners cost more because almost all expenses related to their health care must be borne by state tax dollars.
|
At least 15% of the prisoners in 20 states are 50 or older, according to the ACLU report. In West Virginia, 20% were at least 50. The costs of confining such prisoners are about double — $68,270 per year — the $34,135 annual cost for the average younger inmate. 1 Costs of keeping aging and sick prisoners - $68,270 per year-are double that of younger, healthier inmates. 2 Some inmates languish and die before their release requests are acted on by prison authorities.
|
(AP). State spending on prisoner health care increased in 42 states between 2001 and 2008, with a median growth of 52 percent, according to a new report from The Pew Charitable Trusts. The primary driver of the cost spike is bigger and older prison populations. During the same period, the number of state and federal inmates age 55 and older grew from 40,200 to 77,800, a 94 percent increase. Since 2008, the number of elderly inmates has continued to grow to 121,800 in 2011.
|
The Pew Center on Research has estimated that the cost of managing an elderly prisoner is approximately $70,000 annually. This yields a per diem of $192, compared with the Department’s average healthcare cost of $10.96 per inmate per day for all facilities during Fiscal Year 2013-14. The remaining 82,209 prison population is under the age of 50, and their health care costs average approximately $2,500 per prisoner.”. “This rough analysis indicates that elderly prisoners cost four times as much as non-elderly prisoners.
|
Assuming hospitalization days are representative of overall prison health care costs, the elderly prison population was responsible for approximately half of the $408 million prisoner healthcare costs in 2012, which averages to $11,000 per year solely for the health care of elderly prisoners. The remaining 82,209 prison population is under the age of 50, and their health care costs average approximately $2,500 per prisoner.”. “This rough analysis indicates that elderly prisoners cost four times as much as non-
|
how long does it take to heal from a piercing
|
Healing time is different depending on the part of your body that you get pierced. Some parts are more likely to get infected or have problems. Piercings on your ear lobes usually take about 6-8 weeks to heal. However, piercings on the side of your ear (cartilage) can take anywhere from 4 months to 1 year to heal.
|
Keep the same earring on till it’s completely healed. I have 6 ear piercings n all took different lengths of time to heal. Longest was on the cartilage on the top lobe. About 6 months. My belly ring took over 6 months n my nose ring nearly 1 year. Depends how irritated it gets.
|
Until the piercing has healed, taking the earring post out of the hole will only expose your raw tissue to infection. For ear piercings, the healing process typically takes 6-8 weeks. During that time, you must wear the earring you put into your new piercing at all times or risk a painful
|
How long does it take to heal a lip piercing? So long as the lip piercing is performed correctly and proper aftercare is followed and no infection or other hindrance in the healing process occur, most lip piercings require a minimum of six to eight weeks to heal.
|
No piercing is considered fully healed until it's a year old. Contrary to what you may read, it takes the body a full year to season a piercing to the point where it can be removed for extended periods of time without the risk of the piercing closing.
|
cost for mastectomy
|
1 On average, a mastectomy can run about $9,000 to $50,000 for the removal of two breasts. 2 In the state of Chicago, a mastectomy may cost $7,000 to $20,000. 3 The higher price usually includes anesthesia, supplies, as well as the surgeon’s fee. 1 The location of the medical clinic usually contributes to the varying price for mastectomy. 2 On average, a mastectomy can run about $9,000 to $50,000 for the removal of two breasts. 3 In the state of Chicago, a mastectomy may cost $7,000 to $20,000
|
1 For example, women on a BreastCancer.org forum report chemotherapy costs of $7,000-$40,000 per treatment. 2 Depending on the individual case and the type and number of treatments needed, the total cost of breast cancer treatment, on average, can reach $100,000 -- or, in advanced cases, $300,000 or more. 1 This typically costs $5,000-$15,000 or more per breast for implants or from $25,000-$50,000 or more per breast for flap techniques using tissue from the patient's own body. 2 Breast cancer patients will need regular follow-up doctor visits and screenings to check for recurrence.
|
1 For patients not covered by health insurance, breast cancer treatment typically costs $15,000-$50,000 or more for a mastectomy or $17,000 to $35,000 or more for a lumpectomy followed by radiation. 1 This typically costs $5,000-$15,000 or more per breast for implants or from $25,000-$50,000 or more per breast for flap techniques using tissue from the patient's own body. 2 Breast cancer patients will need regular follow-up doctor visits and screenings to check for recurrence.
|
1 Expect to pay about $37,000 for a radical mastectomy, which involves removal of breast tissue, nipple, underlying muscle and lymph nodes; costs can reach $50,000 or more if there are complications. 2 Doctor fees and laboratory pathology costs can add up to $2,000 or more each to the total bill. 1 For example, BlueCross BlueShield of Tennessee estimates a cost of more than $15,000 for a bilateral prophylactic mastectomy. 2 Saint Elizabeth Regional Medical Center in Nebraska, charges about $14,000-$37,000 for a simple complete
|
1 If a mastectomy is required, the patient might choose to get breast reconstruction. 2 This typically costs $5,000-$15,000 or more per breast for implants or from $25,000-$50,000 or more per breast for flap techniques using tissue from the patient's own body. 1 This typically costs $5,000-$15,000 or more per breast for implants or from $25,000-$50,000 or more per breast for flap techniques using tissue from the patient's own body. 2 Breast cancer patients will need regular follow-up doctor visits and screenings to check for recurrence.
|
what does the brachialis muscle do
|
The brachialis (brachialis anticus) is a muscle in the upper arm that flexes the elbow joint. It lies deeper than the biceps brachii, and is a synergist that assists the biceps brachii in flexing at the elbow. It makes up part of the floor of the region known as the cubital fossa. The brachialis muscle and brachial muscle can be considered as the anglicized variant of the Latin expression musculus bracchialis. In classical Latin bracchialis means of or belonging to the arm, and is derived from classical Latin bracchium ,arm.
|
The brachialis muscle is located in the upper arm. It lies underneath the biceps muscle. It acts as a structural bridge between the humerus, which is the bone of the upper arm, and the ulna, which is one of the forearm bones. The muscle is innervated by both the musculoskeletal nerve and the radial nerve. In some people, the muscle may appear doubled. Also called the brachialis anticus, its primary action is to flex the forearm muscles at the elbow. Due to its high contractile strength, the branchialis makes many arm and elbow movements possible. Such movements are important for the activities of daily life
|
The brachialis is a muscle located at the front of your upper arms. It originates at the lower half of the front of the humerus, or upper arm bone, and inserts at the front of the ulna, or outer forearm bone. If you look directly at the front of your upper arms, you can't see the brachialis. This is because it actually lies underneath the two-headed biceps muscle group. To see the brachialis, you need to flex your arms by bending your elbows and then look at the outer side of your upper arms.
|
When properly developed, the brachialis muscles help the biceps appear bigger, especially the lower portion of the biceps. The brachialis helps in elbow flexion when an overhand grip is used on a weight bar, and also helps to initiate elbow flexion.
|
Function. The brachialis is the strongest flexor of the elbow joint. It is even a stronger flexor than the biceps brachii, because it is closer to the joint axis and furthermore only stretches over one joint in contrast to the biceps brachii. A small contraction of the muscle consequently leads to a larger flexion in the elbow. Pathology. In cases of extreme strain of the elbow, inflammation of the brachialis tendon (brachialis tendonitis) or injuries of the joint capsule often occur. Too many pull-ups, excessive tennis practice or other inappropriate strain of the elbow are among the typical causes.
|
downtrodden meaning
|
adjective. The definition of downtrodden is feeling oppressed or kept down by a situation or a ruler. An example of downtrodden is the feelings of citizens in a cruel dictatorship.
|
Downtrodden meaning in Hindi : Get detailed meaning of DOWNTRODDEN in Hindi language.This page shows Downtrodden meaning in Hindi with Downtrodden definition,translation and usage.This page provides translation and definition of Downtrodden in Hindi language along with grammar, synonyms and antonyms. Answer of question :
|
Follow HinKhoj Dictionary on FaceBook and Google.... Tags: Hindi meaning of Downtrodden, Downtrodden meaning in hindi, Downtrodden ka matalab hindi me, Downtroddentranslation and definition in Hindi language.
|
A poor, degraded, downtrodden, ignorant, superstitious people, they were; accustomed for generations to the heel of first one invader and then another and in the interims, when there were any, the heels of their feudal lords and their rapacious monarchs.
|
Full Definition of DOWNTRODDEN. : suffering oppression. See downtrodden defined for English-language learners. See downtrodden defined for kids. ADVERTISEMENT.
|
what does a floor tech do
|
Duties. Floor technicians scrub, shine, clean and repair carpeted and noncarpeted areas using appropriate equipment and chemicals. This job includes moving large furniture and objects and following safety guidelines to prevent injury to themselves and others. Floor technicians clean floors and carpets for large facilities such as gymnasiums, hospitals, businesses and schools. Their work improves the overall appearance of an organization, presenting a clean environment to visitors and employees. 1 Floor Care Technician Job Description.
|
Floor Cleaning Technician. Provides floor maintenance and Some lifting. Hiring Part Floor Tech for Local Retail Store. Handles floor care, including routine mopping (dry and damp),... Swedish Medical Center is looking for a 1.0 FTE Environmental Services Project/Floor Technician... Providence Health & Services - 5 days ago-save job-email-more... 1 View all Swedish Medical Center jobs in Seattle, WA-Seattle jobs.
|
I do not recommend using a damp mop unless it has truly has got all the water completely wrung out of it. We vacuum our pebble tech floors weekly and semi annually get in and really clean them well. We vacuum, then use a carpet steam cleaner, if you can get one with a brush that is best. Use simple green as a cleaner or an antibacterial non sudsy product. If the floor is especially dirty, we use a long handled brush to help the steam cleaner along, let it sit for 15 minutes or so and then rinse, rinse, rinse.
|
Floor Technician. Strip and Wax floors. The duties of a Floor Technician are to operate buffers, sweepers, strippers, mops and other equipment but not limited to the following:.... 4 days ago-save job-email-more... 1 View all GCA Services Group jobs in Whitehall, MI-Whitehall jobs. Swedish Medical Center is looking for a 1.0 FTE Environmental Services Project/Floor Technician... Providence Health & Services - 5 days ago-save job-email-more... 1 View all Swedish Medical Center jobs in Seattle, WA-Seattle jobs.
|
Average Floor Technician Salaries. The average salary for floor technician jobs is $32,000. Average floor technician salaries can vary greatly due to company, location, industry, experience and benefits. This salary was calculated using the average salary for all jobs with the term floor technician anywhere in the job listing. The floor technician salary comparisons feature allows job seekers to get the information required to make important career decisions and negotiate salary ranges. For additional floor technician salary information, we recommend visiting Payscale.com.
|
what family is a gong in
|
Gong 101 - Basics of Gongs. Item# gong-basics. Availability: Usually ships the next business day. The gong is a musical instrument in the percussion family. A gong can have either a definite or an indefinite musical pitch. Gongs come in a variety of sizes, styles, and shapes. Like dialects of language or sects of religion, the instrument evolved differently in each location and culture it was used. Bowl gongs are called such because they are literally bowl-shaped. They can rest on the ground or special cushions. Bowl gongs can be played in several different manners. A musician can bang a bowl gong with a mallet, but might also rub the rim with his or her finger to elicit a whole other sound.
|
Surname Gong 龔, 共 [edit]. Gong (simplified Chinese: 龚; traditional Chinese: 龔, rank 192 in China), aka Kung or Kong in Cantonese (Hong Kong and Macao), is the 99th most prevalent Chinese surname listed in the ancient Song Dynasty classic text, Hundred Family Surnames . It is the English transcription of a number of different Chinese surnames: 宫, 龔, 共, 公, 鞏, 功, 貢, and 弓. Gong may also be a Korean surname, but this Korean Gong may be the English transcription of another surname Kong (孔).
|
Gong Name Meaning. Chinese: the origin of this surname dates back to the time of the legendary emperor Huang Di (2697–2595 bc). An adviser held the surname Gonggong, comprised of two different characters that are pronounced Gong in modern Chinese.
|
A Pasi gong is a medium-size gong 12 to 15 in size, with a crashing sound. It is used traditionally to announce the start of a performance, play or magic. Construction varies, some having nipples and some not, so this type is named more for its function than for its structure or even its sound. The smaller gong is used to announce the entry of lesser players, of women, and to identify points of humour. Opera gongs range in size from 7 to 12, with the larger of a pair one or two inches larger than the smaller.
|
GONG is a Space/Canterbury Rock group formed by Australian guitarist (formerly of SOFT MACHINE) Daevid Allan in Paris, France in 1968. He did not do it alone though, he & his wife, Gilli Smyth are the whole nucleus of that band with numerous band line-ups.
|
denture reline cost
|
1 Dentures may crack or break, and the fit will change over time. 2 Repairs can cost $50-$200 and professional relining to adjust the fit is typically $250-$450. 3 Do-it-yourself repair or reline kits (available from drug stores or online) cost $10-$50. 1 Often the price includes several follow-up visits to fine-tune the fit. 2 Removable partial dentures start at $300 -$500, average around $700-$1,800, and can cost $2,000-$4,000 or more in gold (instead of acrylic or another metal).
|
We carry reline kits here.Reline Denture or Reline Dentures: reline denture or dentures is adding a denture material to denture and placing it into your mouth to fill in the empty space between the denture and the natural gums for a secure fit (reline dentures)(reline denture). We carry reline kits here.Denture Reline Kit: a kit containing denture materials in a package ready to reline or fill the empty space between the denture and the natural gums for a secure fit (denture reline kit)(denture reline) .
|
1 A mid-range denture typically costs $500-$1,500 per plate or $1,000-$3,000 for a set. 2 These offer a fairly personalized fit and usually come with a 1- or 2-year warranty. 3 Premium dentures can cost $2,000-$4,000 per plate, or $4,000-$8,000 or more for a set. 1 Often the price includes several follow-up visits to fine-tune the fit. 2 Removable partial dentures start at $300 -$500, average around $700-$1,800, and can cost $2,000-$4,000 or more in gold (instead of acrylic or another metal).
|
And for this reason, one portion of the expense involved with providing this procedure for you is paying their dental laboratory's bill. Estimate of complete denture dental lab fees: (Your dentist's cost.). 1 Complete denture (upper or lower) - $145.00 to $240.00. With a chairside reline, a runny plastic is placed directly into the patient's denture. The denture is then seated in the patient's mouth. As the plastic hardens, it captures the shape of the patient's gum tissue.
|
1 Tooth extraction typically costs $75-$450 per tooth for a simple extraction and $150-$650 or more per tooth for a surgical extraction. 2 Depending on the number of teeth to be pulled, the total cost of getting dentures can be $1,500-$20,000 or more for a full set (uppers and lowers). 1 Often the price includes several follow-up visits to fine-tune the fit. 2 Removable partial dentures start at $300 -$500, average around $700-$1,800, and can cost $2,000-$4,000 or more in gold (instead of acrylic or another metal).
|
what is virtual net metering
|
Virtual Net Metering (VNM). Virtual Net Metering (VNM) allows energy produced by a renewable generating facility to be credited to the tenants' individual utility accounts who are connected at the same service delivery point. NEM-V vs MASH VNM. How VNM Works. Under Virtual Net Metering, the owner or operator of a multi-tenant property designates the percentage of the total metered output of the generator or generators, to be allocated to each tenant service account known as ‘Benefitting Accounts’.
|
HelioPower’s Virtual Net Metering Experience. HelioPower was early to develop the MASH marketplace and I developed among the first VNM projects in each of the major regulated utilities: Las Serenas in SDG&E, and Sunrise Vista in SCE and Sherwood Village in PG&E territory. Going Virtual. Recently some sectors have been allowed to take advantage of “ Virtual Net Metering ” (VNM) policy, which allows multi-meter property owner to allocate an eligible system’s energy credits to other meters.
|
About Net Metering. Net metering allows you to use the energy generated by your renewable energy system to offset your monthly power bill. Any NV Energy customer who installs a renewable energy system may be eligible for Net Metering. Net Metering Billing. Once your system is complete and a new bidirectional meter is installed, your bill will change to accommodate the additional information provided by the net meter.
|
Under the Rhode Island net metering program, National Grid is not entitled to the system's RECs. However, under the terms of the RE Growth program, National Grid will receive title to the system's RECs. 1 I'm moving into a house with a self-generation system already installed.
|
Net Metering and Remote Net Metering. In a conventional net metering situation, a customer-sited renewable energy system is connected to the utility grid through a customer’s utility meter. Net Metering/Remote Net Metering and Interconnection. Renewable energy systems can be grid-connected (connected to the utility electrical grid), or they can work independent from a utility's electricity distribution system (off-grid).
|
active tb symptoms
|
Symptoms of active TB in the lungs begin gradually and develop over a period of weeks or months. You may have one or two mild symptoms and not even know that you have the disease. Common symptoms include: 1 A cough with thick, cloudy, and sometimes bloody mucus from the lungs (sputum) for more than 2 weeks. 2 Fever, chills, and night sweats. 3 Fatigue and weakness.
|
What Are the Symptoms of Active TB? Active TB begins with a bad cough (produces blood-tinged phlegm) that lasts 3 or more weeks and is accompanied by chest pain, fatigue, loss of appetite, weight loss, fever, chills and night sweating.
|
If you have active TB, you do have symptoms and can spread the disease to others. Which specific symptoms you have will depend on whether your TB infection is in your lungs (the most common site) or in another part of your body (extrapulmonary TB).
|
If TB bacteria become active in the body and multiply, the person will go from having latent TB infection to being sick with TB disease. People with TB disease usually have symptoms and may spread TB bacteria to others. A cough lasting 3 weeks or longer is a symptom of
|
The classic symptoms of active TB infection are a chronic cough with blood-tinged sputum, fever, night sweats, and weight loss (the last of these giving rise to the formerly common term for the disease, consumption). Infection of other organs causes a wide range of symptoms.
|
did the minnesota twins win last night
|
1 Twins Trout shines with grand slam in Angels' 11-8 win over Twins Trout shines with grand slam in Angels' 11-8 win over TwinsThe Los Angeles Angels beat the Minnesota Twins 11-8 on Thursday night.Twins3 weeks, 3 days ago. 1 Twins Rays end Twins 6-game wining streak Rays end Twins 6-game wining streakRelievers Brandon Gomes, Alex Colome and Brad Boxberger combined for 4 2-3 scoreless innings and the Tampa Bay Rays ended Minnesota's six-game winning streak, beating the Twins 5-4 on Thursday night.Twins1 month, 2 weeks ago.
|
The Minnesota Twins are a Major League Baseball (MLB) team based in Minneapolis, Minnesota. They play in the Central Division of the American League. The team is named after the Twin Cities area comprising Minneapolis and St. Paul. Success came quickly to the team in Minnesota. Sluggers Harmon Killebrew and Bob Allison, who had already been stars in Washington, were joined by Tony Oliva and Zoilo Versalles, and later second baseman Rod Carew and pitchers Jim Kaat and Jim Perry, winning the American League pennant in 1965.
|
For the Minnesota Twins, anywhere would've been better than Toronto. Few places have been more enjoyable for visiting teams lately than Cleveland. The Twins try to win two straight for the first time in two weeks Saturday night when they continue this three-game series against the last-place Indians. After forging a 9-all tie with a run in the fifth and sixth, the Twins finally regained the lead on Torii Hunter 's homer in the ninth and held on for the 10-9 win. ''This is not my first rodeo,'' Hunter said. ''I know how to bear down and get it done.
|
MINNEAPOLIS -- The surprising Twins' postseason hopes came to an end on Saturday in the penultimate game of the season, as their 5-1 loss to the Royals ended their late push for the second American League Wild Card spot. MINNEAPOLIS -- The Twins exceeded outside expectations in 2015, getting eliminated from postseason contention on the second-to-last day of the season. Given the contributions from its young core, the club is positioned to remain competitive going forward.
|
Game 7 was won by Minnesota on the 35th birthday of the Twins' Roy Smalley-and was also the last game of his career. Smalley appeared in four games as a pinch-hitter and reached base all four times on a double, an error, and two walks. In 1987, the Twins set the record for the worst (full 162 game) regular season win-loss record of any World Series championship team (85–77, .525). This record stood until it was broken when the Cardinals won the 2006 Series after going 83–78 (.516).
|
linux how to change directory
|
To change directories while in a *nix environment, use the cd command. Below are some basic examples of how this command can be used to change directories. Before changing directories, you need to know what directories are available in the current directory. To do this, use the ls command. For example, type the below command to only list directories in the current directory. ls-d */. See the ls command page for further information and examples of this command. Once you know the directory is available, type a command similar to the below command. For example, type the below command to only list directories in the current directory. dir /ad. See the dir command page for further information and examples of this command. In the picture is an example of the tree command that list all directories and subdirectories from your current location.
|
In Unix, to change a user's home directory, you must have administrator privileges. Modify the second-to-last field in the user's /etc/passwd entry. For example, if you want to move the user dvader from /disk1/dvader to /disk2/dvader, first locate his entry in /etc/passwd.
|
The directory you are standing in is called the working directory. To find the name of the working directory, use the. command. When you first log on to a Linux system, the working directory is set to your home directory. This is where you put your files. (change directory), and. (list files and directories). If you have not worked with a command line interface before, you will need to pay close attention to this lesson, since the concepts will take some getting used to.
|
cd ~. The cd command is used to change the current directory (i.e., the directory in which the user is currently working) in Linux and other Unix-like operating systems. It is similar to the CD and CHDIR commands in MS-DOS. cd [option] [directory]. The cd Command. The cd command is used to change the current directory (i.e., the directory in which the user is currently working) in Linux and other Unix-like operating systems.
|
Change Directory using cd Linux Command. In this Linux tutorial for beginners, you will learn how to change directories in Linux using the cd command. The Linux cd command is very easy to use. There are a couple options you can use with the cd command, but I won’t cover them as I hardly ever use them. I will show you how to use some common variables with the Linux cd command though. When using the Linux cd command to change directory, the syntax of the Unix cd command is cd [directory] . Another way to get to your home directory in Linux is using the home variable $HOME. So if you type cd $HOME you will be taken to your user’s home directory as well. You can also use the $HOME variable as part of a path.
|
acre definition
|
The acre is a unit of land area used in the imperial and US customary systems. It is defined as the area of 1 chain (22 yards) by 1 furlong (220 yards), which is exactly equal to 1⁄640 of a square mile, approximately 4,046.856 m 2, or about 40% of a hectare. Since the difference between the US survey acre and international acre is only about a quarter of the size of an A4 sheet of paper (0.016 square metres, 160 square centimetres or 24.8 square inches), it is usually not important which one is being discussed.
|
: a measure of land area in the U.S. and Britain that equals 4,840 square yards (about 4,047 square meters). : any of various units of area; specifically: a unit in the United States and England equal to 43,560 square feet (4047 square meters) — see weight table.
|
One acre equals 0.0015625 square miles, 4,840 square yards, 43,560 square feet or about 4,047 square metres (0.405 hectares) (see below). Since the difference between the US survey acre and international acre is only about a quarter of the size of an A4 sheet of paper (0.016 square metres, 160 square centimetres or 24.8 square inches), it is usually not important which one is being discussed.
|
1. A unit of area in the US Customary System, used in land and sea floor measurement and equal to 160 square rods, 4,840 square yards, or 43,560 square feet. See Table at measurement. 2. a. acres Property in the form of land; estate. 1. a common variable unit of land measure, now equal in the U.S. and Great Britain to 43,560 square feet or 1/640 square mile (4047 square meters). 2. acres, a. lands; landed property: wooded acres.
|
LINK / CITE ADD TO WORD LIST. noun. The definition of an acre is a unit of measure that is equal to 43,560 square feet or a square which measures 208.71 feet by 208.71 feet. A standard National Football League field not including the end zones is an example of something that is just over an acre. (plural acres). 1 A unit of surface area (symbol a. or ac.), originally as much as a yoke of oxen could plough in a day; later defined as an area 1 chain (22 yd) by 1 furlong (220 yd), or 4,840 square yards. 2 Equivalent to about 4,046.86 square metres. ( 3 in the plural, informal) A large amount (of area).
|
hours for montgomery county libraries
|
301 North Thompson, Suite 105, Conroe, Texas 77301. Phone: 936-539-7960 Pro Se Services: 936-539-7976 Fax: 936-538-8058. Monday-Friday 8 a.m. to 5 p.m. The Montgomery County Law Library makes available legal print and online resources to local judges, litigants, and attorneys. The Law Library is open to the general public. Members of the general public are welcome to come in to do their own research. There is no fee to use the legal resources on premises.
|
The Brendlinger Library at Montgomery County Community College is a congressionally designated depository for U.S. Government documents. Public access to the government documents collection is guaranteed by public law (Title 44 United States Code).
|
The fee is used to make available legal materials to local judges, litigants, and lawyers; and to staff the Law Library. The County provides the space and maintains the Law Library. The Montgomery County Law Library was renovated in 2011.
|
For help locating government information, both within our libraries and online, contact our librarians in person, by phone 215-641-6594, instant message (mccclibrarian) or email This email address is being protected from spambots.
|
The library will close at 6pm on Saturday, October 10, and is expected to reopen early next year (2016). http://ow.ly/SUkn4. Montgomery County Public Libraries-Kensington Park LibraryInformation about the Kensington Park Library, including location, directions, hours, and events.montgomerycountymd.gov. Montgomery County Public Libraries-Kensington Park Library.
|
what is the difference between weight & mass
|
By Anne Marie Helmenstine, Ph.D. The difference between mass and weight is that mass is the amount of matter in a material and weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the amount of matter in a body. Mass is denoted using m or M.
|
Weight is a force caused by gravity. The weight of an object is the gravitational force between the object and the Earth. The more mass the object has the greater its weight will be. Weight is a force, so it's measured in newtons. On the surface of the Earth an object with a mass of 1 kg has a weight of about 10 N.
|
There is a common perception that weight and mass are basically the same thing. This video aims to tease out the difference between mass and weight by asking people what makes a car difficult to push. The standard answer is that it is difficult to push because it's heavy.
|
Weight is an extensive physical property because it increases when the object size is getting higher. Difference between Density and Weight. 1. Weight is a measure of the amount of matter in an object, whereas density measures the amount of matter in a unit volume. 2. Density is an intensive physical property, whereas weight is an extensive property. 3. Weight is measured in Newtons, whereas density is measured in kilograms per cubic meter
|
An example of mass and weight-the moon. In the below example, we've featured an astronaut on earth and on the moon. The Moon's gravity is much less than the Earth's gravity-approximately one sixth. So, a 100 kg astronaut weighs 980N on Earth. On the Moon, the astronaut would weigh only 162.2N.
|
what type of receptor is responsible for sense of smell
|
The sensory receptors involved in taste and smell contain receptor molecules that bind to specific chemicals. Odor receptors in olfactory receptor neurons, for example, are activated by interacting with molecular structures on the odor molecule. Similarly, taste receptors (gustatory receptors) in taste buds interact with chemicals in food to produce an action potential.
|
1 The cilia of the sensory neurons are immersed in a layer of mucus. 2 Odorant molecules (molecules that we can smell) dissolve in the mucus and. 3 bind to receptors on the cilia. 4 These are 7-pass transmembrane proteins. 5 Binding of the odorant activates a G protein coupled to the receptor on its cytoplasmic side. 1 bind to receptors on the cilia. 2 These are 7-pass transmembrane proteins. 3 Binding of the odorant activates a G protein coupled to the receptor on its cytoplasmic side. 4 This activates adenylyl cyclase, an enzyme embedded in the plasma membrane of
|
Taste and Smell Receptors. Chemoreceptors are responsible for the detection of chemicals in our environment. From the ability to taste and enjoy a piece of candy to the pleasure of perfume, these receptors transmit the information. Sweet, salty and sour tastes are dependent on these receptors.
|
The chemoreceptors of taste and smell are closely related; in fact one receptor type, the Lewis acid receptor is common to both the taste (gustatory) and smell (olfactory) modalities.
|
Olfaction or the sense of smell involves chemicals. The receptors for smell are the olfactory hair cells located on the roof of each nasal cavity in a path of cells called the olfactory epithelium or membrane. Odors or scents chemical vapors. Chemoreceptor cells (neurons) perceive the chemicals as they vaporize.
|
what is good eye pressure
|
Eye pressure is measured in millimeters of mercury (mm Hg). Normal eye pressure ranges from 10 to 21 mm Hg. When a person's pressure is higher than 21 mm Hg, they are at an increased risk for developing glaucoma. Some people can tolerate pressures slightly higher than normal without developing glaucoma
|
Normal intraocular pressures average between 12-22 mm Hg. The “mm Hg” refers to millimeters of mercury, which is a scale for recording the eye pressure. Eye pressure can vary hourly, daily and weekly. Many factors can affect the up and down changes in a person's intraocular pressure. These daily changes are normal. Usually, the higher the pressure, the more risk to the optic nerve. Some optic nerves develop glaucoma even at low pressures (this is called normal-tension glaucoma) so it is important to have the optic nerve examined no matter what the pressure may be.
|
Measuring Eye Pressure. Eye pressure is measured in millimeters of mercury (mm Hg). Normal eye pressure ranges from 12-22 mm Hg, and eye pressure of greater than 22 mm Hg is considered higher than normal. When the IOP is higher than normal but the person does not show signs of glaucoma, this is referred to as ocular hypertension. High eye pressure alone does not cause glaucoma. However, it is a significant risk factor.
|
Glaucoma is a multi-factorial, complex eye disease with specific characteristics such as optic nerve damage and visual field loss. While increased pressure inside the eye (called intraocular pressure or IOP) is usually present, even patients with normal range IOP can develop glaucoma. When the IOP is higher than normal but the person does not show signs of glaucoma, this is referred to as ocular hypertension. High eye pressure alone does not cause glaucoma. However, it is a significant risk factor.
|
The term ocular hypertension usually refers to any situation in which the pressure inside the eye, called intraocular pressure, is higher than normal. Eye pressure is measured in millimeters of mercury (mm Hg). Normal eye pressure ranges from 10-21 mm Hg.
|
what does it mean when a disease is eradicated
|
If a particular disease is eliminated worldwide, it’s considered eradicated. To date, only one infectious disease that affects humans has been eradicated.* In 1980, after decades of efforts by the World Health Organization, the World Health Assembly endorsed a statement declaring smallpox eradicated. The eradication of smallpox raised hopes that the same could be accomplished for other diseases, with many named as possibilities: polio, mumps, and dracunculiasis (Guinea worm disease), among others. Malaria has also been considered, and its incidence has been reduced drastically in many countries
|
Smallpox. Smallpox is a disfiguring and potentially deadly infectious disease caused by the Variola major virus. Before smallpox was eradicated, there were two forms of the disease worldwide: Variola major, the deadly disease, and Variola minor, a much milder form. According to some health experts, over the centuries smallpox was responsible for more deaths than all other infectious diseases combined
|
Can it be treated? There is no cure for smallpox, but vaccination can be used very effectively to prevent infection from developing if given during a period of up to four days after a person has been exposed to the virus. This is the strategy that was used to eradicate the disease during the 20th century. Smallpox is an ancient disease caused by the variola virus. Early symptoms include high fever and fatigue. The virus then produces a characteristic rash, particularly on the face, arms and legs.
|
It is sometimes confused with elimination, which describes either the reduction of an infectious disease's prevalence in a regional population to zero, or the reduction of the global prevalence to a negligible amount. Studies of measles in the pre-vaccination era led to the concept of the Critical community size, the size of the population below which a pathogen ceases to circulate. Use of vaccination programmes before the introduction of an eradication campaign can reduce the susceptible population. The disease to be eradicated should be clearly identifiable, and an accurate diagnostic tool should exis
|
Selection of infectious diseases for eradication is based on rigorous criteria, as both biological and technical features determine whether a pathogenic organism is (at least potentially) eradicable. Studies of measles in the pre-vaccination era led to the concept of the Critical community size, the size of the population below which a pathogen ceases to circulate. Use of vaccination programmes before the introduction of an eradication campaign can reduce the susceptible population. The disease to be eradicated should be clearly identifiable, and an accurate diagnostic tool should exist
|
can farmhouse sinks with laminate countertops
|
See the article on faucets to see which ones will work with a farmhouse sink. Kohler’s farmhouse sink is mounted under the counter top. A farmhouse sink can not be used with a laminate counter top, so your choices are stone, man-made quartz, man-made solid surface or wood. Wood?! Teak is a great choice….think of boats…but it does need regular maintenance with a food-safe oil, and should not have liquids pooling on it for long periods of time. 1 Typically used with a laminate or wood counter. 2 Undermount: This sink is mounted under the counter top so the rim is hidden. 3 Typically used with a stone or solid surface counter top. 4 Double bowl: This sink has two bowls, not necessarily the same size.
|
Yes, I confirm that's possible! I have an Ikea Domsjo (farmhouse/apron) sink with a Wilsonart HD laminate countertop in my rental kitchen. The self-rimming feature of the sink makes for a problem-free installation with a laminate countertop. Undo. writersblock. Should have specified that the drop in non-farmhouse domsjo can be undermounted in stone or quartz or corian. No sink can be undermounted in laminate except the acrylic ones that come with the countertop or from that one company that does them as aftermarkets.
|
Special attention should be made when utilizing these sinks with a laminate countertop: 1. Sink Support: Make sure the inner walls of your cabinets have adequate building support for the weight of the sink. 2. Sealing: Use a silicone sealant to seal all edges of the sink to the laminate countertop to prevent water from leaking into your cabinet/countertop substrate. It's always wise to consult your local fabricator due to various top-mount and under-mount sink varieties on the market today.
|
But it's tricky because we selected a Farm Sink. The farm sink can't be undermounted with a formica countertop because of the potential for water to penetrate the MDF particleboard and then it will fail. So, we are overmounting the sink, that is the sink will be raised by about 1/2 above the countertop. Farm sinks are installed both ways if you look around.
|
1 Top mount: This is a self-rimming sink that sits on top of the counter. 2 Typically used with a laminate or wood counter. 3 Undermount: This sink is mounted under the counter top so the rim is hidden. 4 Typically used with a stone or solid surface counter top. 1 Typically used with a laminate or wood counter. 2 Undermount: This sink is mounted under the counter top so the rim is hidden. 3 Typically used with a stone or solid surface counter top. 4 Double bowl: This sink has two bowls, not necessarily the same size.
|
partial toll road meaning
|
Partial toll roads mean that the road has a section that is a toll road, and a section that is not. For instance, in the state of Illinois, I80 is a toll road as you enter from Indiana, but once you are past Chicago, it is no longer a toll road.
|
In other instances, a toll road was built, and the Feds decided to add to it when making the Interstate system, so the original part of the road is a toll road and the part that was build with Federal money is not. Source(s): [email protected] · 8 years ago.
|
It means that there is a part of the road-if you're travelling on it, that will require you to pay a toll, and part of it that will not. Like on I87, if you're just driving on it through the Bronx, you won't have to pay a toll, but if you're taking it towards upstate, there's a point where you will. That's all it means.
|
Answer by Xquizzyt1. Confidence votes 181. It means that there is a part of the road-if you're travelling on it, that will require you to pay a toll, and part of it that will not. Like on I87, if you're just driving on it through the Bronx, you won't have to pay a toll, but if you're taking it towards upstate, there's a point where you will. That's all it means. On the flip side, there are other roads, like the NJ Turnpike, where no matter where you enter or exit, you will have to pay a toll. Those are not partial toll roads. They are plain ol'
|
It means that there is a part of the road-if you're travelling on it, that will require you to pay a toll, and part of it that will not. Like on I87, if you're just dr … iving on it through the Bronx, you won't have to pay a toll, but if you're taking it towards upstate, there's a point where you will.
|
Which type of memory is used as the working storage area of the computer
|
Dynamic RAM (DRAM) and static RAM (SRAM) chips are the working storage in every computer. DRAM is the main memory in a computer and SRAM is used for high-speed caches and buffers. Both types are byte addressable, which means that data can be read and written one byte at a time.
|
RAM is the working memory storage area within the computer. All data on the computer is stored on the hard drive, but in order for the CPU to work with the data during normal operations, the data the computer uses and works with is read into the working memory, which is the RAM chips.
|
1) Primary storage, also known as main storage or memory, is the area in a computer in which data is stored for quick access by the computer's processor. The terms random access memory (RAM) and memory are often as synonyms for primary or main storage.
|
Memory and Storage. Memory is also known as primary storage, primary memory, main storage, internal storage, main memory, and RAM (Random Access Memory); all these terms are used interchangeably by people in computer circles. Memory is the part of the computer that holds data and instructions for processing.
|
Internal storage areas in the computer. The term memory identifies data storage that comes in the form of chips, and the word storage is used for memory that exists on tapes or disks. Moreover, the term memory is usually used as a shorthand for physical memory, which refers to the actual chips capable of holding data.
|
what are the structures involved in removing waste from the body
|
The excretory system is a system of organs that removes waste products from the body. When cells in the body break down proteins (large molecules that are essential to the structure and functioning of all living cells), they produce wastes such as urea (a chemical compound of carbon, hydrogen, nitrogen, and oxygen).
|
Other systems and organs in the body also play a part in excretion. The respiratory system eliminates water vapor and carbon dioxide through exhalation (the process of breathing out). The digestive system removes feces, the solid undigested wastes of digestion, by a process called defecation or elimination.
|
Urea: Chemical compound of carbon, hydrogen, nitrogen, and oxygen produced as waste by cells that break down protein. Ureter: Tube that carries urine from a kidney to the urinary bladder. Urethra: Duct leading from the urinary bladder to outside the body through which urine is eliminated.
|
There are two systems that remove wastes from the body. The lower digestive tract (the colon) removes solid wastes and sodium whiles it retains water. The urinary system remov … es waste from the blood by way of the kidneys.
|
The respiratory system provides oxygen to the body’s cells while removing carbon dioxide, a waste product that can be lethal if allowed to accumulate. There are 3 major parts of the respiratory system: the airway, the lungs, and the muscles of respiration.
|
what did colin fry die of
|
PA. The TV medium Colin Fry has died of lung cancer aged 53. Fry, who appeared on Most Haunted and presented the popular UKTV show 6ixth Sense, passed away in hospital in the early hours of Monday morning, his management said in a statement on his website. He was diagnosed with terminal cancer in April. Colin Fry, the TV medium and spiritualist, who appeared on Most Haunted, Psychic Private Eyes and 6ixth Sense With Colin Fry, has died of lung cancer on 25 August, aged 53.
|
Colin Fry has passed away (Picture: Ken McKay/ITV/REX Shutterstock). Reverend Colin Fry has died at the age of 53. The TV medium known for his appearances in Most Haunted, Psychic Private Eyes and 6ixth Sense With Colin Fry, was suffering from terminal lung cancer.
|
Image caption Colin Fry was diagnosed with cancer earlier this year. TV medium Colin Fry has died at the age of 53, his management has announced. The spiritualist, whose shows included Most Haunted and 6ixth Sense With Colin Fry, was diagnosed with terminal lung cancer in April. He cancelled his 6ixth Sense Anniversary Tour after his diagnosis.
|
Colin Fry, the TV medium has died after battling terminal lung cancer Colin Fry. TV medium Colin Fry, who appeared in shows including Most Haunted and 6ixth Sense with Colin Fry has died at the age of 53. The spiritualist's manager David Hahn, said: He had a very big heart. Since the diagnosis, he'd been very upbeat. Because of what he does, he had no fear of death..
|
7:50PM BST 30 Aug 2015. Comments. Colin Fry, who has died aged 53, was a self-proclaimed medium who relayed messages from “the dead” to audiences in Australia, New Zealand, Norway and Japan; on British satellite television he featured in such “paranormal reality” shows as Most Haunted and 6ixth Sense.
|
how much does insurance pay for assisted living
|
The cost of Assisted Living Facilities nationwide can vary from $2,000 - $5,000 per month. Sometimes people have a false sense of security about what their insurance will pay. It’s important to know right up front that Medicare will not pay for assisted living. But, don’t give up all hope yet.
|
The national median monthly rate for a one-bedroom unit in an assisted living facility is $3,500, according to the 2014 Cost of Care Survey released in April by Genworth Financial Inc. of Richmond, Virginia. That's $42,000 per year, an increase of 1.45 percent over 2013.
|
Long-term care insurance, an umbrella term for insurance that covers nursing home care, home-based health care and assisted living health care in addition to other medical services, can help shoulder the cost of assisted living services for those who have a policy with a few restrictions. The Census Bureau estimates that, on average, the per-diem rate for assisted living in a private room is about 60%-70% of the cost of a similar-sized room in a nursing home. That could mean a bill of between $50 and $120 per day, and a good-sized case of sticker shock for potentially millions of America
|
While Medicare won’t pay for assisted living services, in some cases, Medicaid will. Specifically, Medicaid may pay for a respite stay at an assisted living facility for a limited duration (mostly 90 days or less). The Census Bureau estimates that, on average, the per-diem rate for assisted living in a private room is about 60%-70% of the cost of a similar-sized room in a nursing home. That could mean a bill of between $50 and $120 per day, and a good-sized case of sticker shock for potentially millions of Americans
|
1 Ask how long or how much the policy pays. 2 Some pay the costs for two to five years, while other insurance companies offer policies that pay long-term care costs for as long as you live-no matter how much it costs. 3 Comparison shop among several policies. 1 Know the limits. 2 Ask how long or how much the policy pays. 3
|
what kind of toxin is Cadmium
|
Cadmium is a soft, malleable, ductile, bluish-white divalent metal. It is similar in many respects to zinc but forms complex compounds. Unlike most other metals, cadmium is resistant to corrosion and as a result it is used as a protective layer when deposited on other metals. Cadmium and its congeners are not always considered transition metals, in that they do not have partly filled d or f electron shells in the elemental or common oxidation states. The average concentration of cadmium in Earth's crust is between 0.1 and 0.5 parts per million (ppm).
|
Pure cadmium is a soft, silver-white metal found naturally in small amounts in soil. Cadmium usually combines with other things to form different compounds. Some of these compounds affect the body more than others. Cadmium does not have a definite taste or odor. Cadmium is not mined, but it is a by-product of the smelting of other metals such as zinc, lead, and copper. Cadmium is used in nickel-cadmium rechargeable batteries and for metal plating. It will explain what cadmium is, where it is found, how it can affect your health, and what you can do to prevent or reduce exposure to it. Cadmium is released into the environment from mining and metal processing operations, burning fuels, making and using phosphate fertilizers, and disposing of metal products.
|
The expanding Ni-Cd battery recycling industry is a concern for cadmium exposure. Electroplating, metal machining, welding and painting are operations associated with cadmium exposure. Workers involved in landfill operations, the recycling of electronic parts, or the recycling of plastics may be exposed to cadmium.
|
Introduction. The term heavy metal refers to any metallic chemical element that has a relatively high density and is toxic or poisonous at low concentrations. Examples of heavy metals include mercury (Hg), cadmium (Cd), arsenic (As), chromium (Cr), thallium (Tl), and lead (Pb).
|
Cadmium is used extensively in electroplating, although the nature of the operation does not generally lead to overexposures. Cadmium is also found in some industrial paints and may represent a hazard when sprayed. Operations involving removal of cadmium paints by scraping or blasting may pose a significant hazard. The Cadmium (Cd) is an extremely toxic industrial and environmental pollutant classified as a human carcinogen [Group 1 – according to International Agency for Research on Cancer; Group 2a – according to Environmental Protection Agency (EPA); and 1B carcinogen classified by European Chemical Agency.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.